Preparation for USE, Operations | Sylvania TVK131, TVK191 specs

To cancel the sleep timer:

SLEEP 10

PREPARATION FOR USE

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the procedure below.

Connect the power cord to a standard AC outlet.

Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO". Then, press the VOL(ume) ▲ button.

The tuner scans and memorizes all active channels in your area.

● The TV distinguishes between standard TV channels

ADD/DELETE AUTO MEMO

Press the POWER button to turn on the TV.

Press the MENU button so that the menu display appears on the TV screen.

Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".

Select "ENGLISH" or "ESPAÑ OL" = Spanish by using the VOL(ume) ▲ or ▼ button.

PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF]

and cable (CATV) channels.

● When AUTO MEMO action is completed, the lowest

memorized channel reappears on the screen.

● When you press the CH(annel) ▲ or ▼ button after

selecting AUTO MEMO, the tuner will stop at the memorized

channels only.

● The TV may detect TV channels as CATV channels

if the receiving conditions are poor. In this case, try AUTO MEMO action

again when receiving conditions are better.

[ADD/DELETE FUNCTION]

Press the MENU button to exit the menu.

CHANNEL PRESETTING

NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲/▼ button. To preset a channel or to change a preset channel, follow the procedure below.

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.

3)Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.

4)Use the CH(annel) ▲ or ▼ button to select the

channel you wish to put into memory or to erase from memory. Note: The display will return to a normal screen in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the

PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF]

ADD/DELETE

AUTO MEMO

Press the POWER button to turn on the TV.

Press the MENU button so that the menu display appears on the TV screen.

Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.

PICTURE CHANNEL SET [ENGLISH]ESPAÑOL V-CHIP SET UP CAPTION [OFF]

screen.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) ▲ or ▼ button to light up the channel number

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.

OPERATIONS

WATCHING A TV PROGRAM

PICTURE ADJUSTMENT

1)Press the POWER button to turn on the TV.

2)Select the desired channel with the CH(annel) ▲ or ▼ button.

3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.

4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)

SETTING THE SLEEP TIMER

The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.

1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .

2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will

1)Press the MENU button so that the menu display appears on the TV screen.

2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.

3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.

GAME MODE	Notes:
Set to the most suitable position for TV	● In the above steps, the picture adjustment
GAME.	display will disappear from the TV screen
[+] : ON	automatically after about 10 seconds if you
[ - ] : OFF	do not press any buttons, even though you
BRIGHT	may not be finished. Press the MENU and
Adjust until the whitest parts of the picture are	VOL(ume) ▲ button so that "PICTURE" is
as bright as you prefer.	selected. Then, press the CH(annel) ▲ or ▼
[+] : increase brightness	button repeatedly until the display returns to
[ - ] : decrease brightness	the screen.

be displayed on the screen when you press the SLEEP

Press the SLEEP button repeatedly

CONTRAST

● If you adjust the other Picture control after

button on remote control.)

until "SLEEP 0" is displayed.

Adjust to increase or decrease contrast.	you set the Game mode to [ON], the Game

Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.

CLOSED CAPTION SELECTION

You may view specially labeled (cc) TV pro-			1) Press the MENU button so that the menu
grams, movies, news, prerecorded tapes, etc.				display appears on the TV screen.
with either a dialogue caption or text display			2) Press the CH(annel) ▲ or ▼ button to point
added to the program.				to "CAPTION".
			3) Press the VOL(ume) ▲ or ▼ button to select
				the mode you wish.
			4) When done, press the MENU button to exit
: Press the VOL(ume) ▲ or ▼ button.				the menu.

PICTURE	PICTURE	PICTURE			PICTURE	PICTURE
CHANNEL SET	CHANNEL SET	CHANNEL SET			CHANNEL SET	CHANNEL SET
[ENGLISH]ESPAÑOL	[ENGLISH]ESPAÑOL	[ENGLISH]ESPAÑOL			[ENGLISH]ESPAÑOL	[ENGLISH]ESPAÑOL
V-CHIP SET UP	V-CHIP SET UP	V-CHIP SET UP			V-CHIP SET UP	V-CHIP SET UP
CAPTION [OFF]	CAPTION [ C1]	CAPTION [ C2]			CAPTION [ T1]	CAPTION [ T2]

	[+] : increase contrast	mode is set to [OFF] automatically.
	[+] : increase contrast
	[ - ] : decrease contrast	[USING THE GAME BUTTON]
	COLOR	[USING THE GAME BUTTON]
	COLOR	You may also set the Game mode and external
	Adjust to be brilliant or pale color.	You may also set the Game mode and external
	Adjust to be brilliant or pale color.	input mode at the same time by pressing the
	[+] : be brilliant color	input mode at the same time by pressing the
	[+] : be brilliant color	GAME button on the remote control. “GAME”
	[ - ] : be pale color	GAME button on the remote control. “GAME”
	[ - ] : be pale color	appears on the TV screen.
	TINT	appears on the TV screen.
	TINT	● To exit the Game mode and external input
	Adjust to obtain natural skin tones.	● To exit the Game mode and external input
	Adjust to obtain natural skin tones.	mode, press the GAME button on the remote
	[+] : greenish tone	mode, press the GAME button on the remote
	[+] : greenish tone	control again.
	[ - ] : reddish tone	control again.
	[ - ] : reddish tone	● To cancel the Game mode only, adjust the
		● To cancel the Game mode only, adjust the
		picture control. In this case, “VIDEO” instead
		of “GAME” appears on the TV screen.
		● If you press the GAME button when the TV
		is off, the TV turns on and will be in the
		Game mode and external input mode auto-
		matically.

	: Press the CH(annel) ▲ or ▼ button.

[-]

GAME MODE [+]

[-]

BRIGHT

[+]

[-]CONTRAST [+]

[-]

COLOR

[+]

[-]

TINT

[+]

OFF

PREPARATION FOR USE

LANGUAGE SELECTION

CHANNEL PRESETTING

RESUME FUNCTION

OPERATIONS

WATCHING A TV PROGRAM

PICTURE ADJUSTMENT

SETTING THE SLEEP TIMER

GAME MODE

GAME.

BRIGHT

CONTRAST

CLOSED CAPTION SELECTION

the menu.

COLOR

TINT