Preparing for Operations

FUNCTION BUTTONS AND EXTERNAL SOCKETS

1.Front Panel

Figure A

Antenna cable with a plug

Antenna

Figure B

75-300Ω

Antenna adapter

Antenna feeder

Antenna connection

Connect an antenna to the antenna socket on the TV set, we recommend using a Cable TV system for better picture and audio quality.

1.If you use a coaxial cable(75Ω),insert the antenna plug (see figure C) into 75Ωsocket (see figure A).

2.If you use a twin-lead cable(300Ω),please shape the cable as figure D, and connect the leads to antenna adapter and then insert the antenna adapter into the 75Ωsocket (see figure B).

Power source wire connection Insert the power plug into AC outlet. Install and replace batteries of the

⑤⑥⑦	②
	②
④
①
③

①Remote sensor:Let the remote controller aim here, the set can receive remote control signal.

②Power switch:Press the button to turn on the TV set . Press the button again to turn off the TV set.

③Power indicator: The indicator lights when power on.

④Menu button

Figure C					Figure D
Coaxial cable(75Ω)				twin-lead cable(300Ω)

remote control unit:

1.Place the remote control unit with the face down, then open the battery cover of the unit.

⑤Program up/down button

⑥Volume up/down button

⑦TV/AV

2.The sockets on the rear panel

2.Place the two"AA"size batteries, matching the + and - signs on each battery to the + and -signs of the battery compartment.

3.Close the cover of the battery compartment. NOTE:

(1)Don't drop or wet or dismantle the unit. (2)If you don't intend to use the unit for a long period or the electricity of the

batteries is used up, remove the batteries to prevent batteries acid from leaking into the battery compartment.

(3)Replace the two old batteries at the same time.

(4)Don't use charge battery (Ni-cd )and don't mix battery type.

(5)Don't throw your batteries into a fire. Dispose of your batteries in a required place.

①Antenna socket

②Audio/Video socket

③S-Video socket

④DVD component socket 3.The socket on the

side panel

⑤Video input socket

⑥Audio(L) input socket

⑦Audio(R) input socket

	Y	Cb	Cr
		3		①
		3
	IN
S-VIDEO	VIDEO	L	AUDIO R
③	OUT
				2
				④

VIDEO2

⑤

L ⑥

AUDIO2

R ⑦