Grundig VISION 7 42-7952 T Enlarges the picture, Selects subpages in teletext mode, AV receiver

OVERVIEW ----------------------------------------------------------------------------------------------

SCAN	Enlarges the picture;
	switches to double character size in teletext mode.
PAT	Selects the split screen function in teletext mode.
S	Selects different subtitles (in digital TV operation);
	selects subpages in teletext mode.
P	Selects channel lists (»All Channels«, »RADIO«,
	»FAV1« to »FAV4«);
	page hold in teletext mode.
M	Switches to operation of a GRUNDIG
	digital receiver, GRUNDIG digital receiver with
	hard disk (PDR), GRUNDIG DVD player,
	GRUNDIG DVD recorder or GRUNDIG
	AV receiver.
	Press »M« until the »DR«, »DVD« or »AMP«
	display lights up.
	Then select the one you want.
	If you do not press a button within 10 seconds,
	the remote control returns to television mode
	(»TV«).
	Note:
	»DR« has been programmed for operating a
	GRUNDIG digital receiver (remote control
	level 1).
	»DVD« has been programmed for operating a
	GRUNDIG DVD player.
	»AMP« has been programmed for operating a
	GRUNDIG AV receiver.
	The functions available depend on the model of
	the device you are using.
	Just try it out.
	You can change this programming:
	Press and hold down »M« and press three
	number buttons to enter the code:
	»1«, »2«, »3« for a GRUNDIG DVD player.
	»4«, »5«, »6« for a GRUNDIG DVD recorder.
	»1«, »4«, »7« for a GRUNDIG digital receiver
	(remote control level 1).
	»2«, »5«, »8« for a GRUNDIG digital receiver
	(remote control level 2).
	»3«, »6«, »9« for a GRUNDIG digital receiver
	with a hard disc (PDR).

12