Grundig VISION 7 37-7952 T manual Connecting the antenna and the mains cable, Power cord

CONNECTION/PREPARATION ----------------------

Connecting the antenna and the mains cable

1 2 3

1 Plug the cable of the rooftop or indoor antenna (passive or active indoor antenna with its own power supply for digital tele- vision stations) into the antenna socket »ANT IN« on the tele- vision set;

or

plug the rooftop antenna cable (for analogue television stations) into the »ANT IN« socket on the television.

Note:

When connecting an indoor antenna you may have to try it out at different positions until you get the best reception.

Vision 37	2 Plug the mains cable supplied into the »AC IN« mains socket of
	the television.

3 Plug the mains cable into the wall socket.

	Note:
	Only plug the device into the mains socket after you have
	connected the external devices and the antenna.
Vision 42	Only connect the television using the power cord supplied to a
	suitable earthed safety socket.
	Do not use an adapter plug or extension lead which does not
	meet the applicable safety standards. Do not tamper with the
	power cord.

ENGLISH

7