Connections
Cable and VCR Connections - Continued
Diagram #2
Connections
Stereo VCR/DVD Connections
You can use the connection shown below for
INPUT
OVER
VIDEO | AUDIO OUT |
L/ MONO | L |
R | R |
75Ω
(VHF/UHF)
Cable
Box
OUT IN
•The
Illustration of
Stereo VCR or DVD Player
IN
VCR
| (Yellow) |
IN | (White) |
OUT | (Red) |
|
BNC Connector box
IN
OUT
INPUT |
| OR |
|
| |
|
| |
OVER |
|
|
| AUDIOAUDIOOUTOUT | 75 |
VIDEO | (VHF/UHF) | |
L/ MONO | L |
|
Illustration of
1)Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.
2)Connect an RF cable from the RF Output on the cable box, in to the RF Input on the back of the VCR.
3)Connect an RF cable from the RF Output on the VCR, in to the RF Input on the back of the TV.
•Please consult your VCR’s owner’s manual for more information on its operation.
•See page 13 for instructions on making stereo connections with your VCR.
The connection diagrams are intended to show some basic connections. Some cable companies may require special connections to properly use your television. If you follow these diagrams and the television does not work properly, contact your local cable operator for more connection information.
R | R |
1)Connect the yellow video cable out from the VCR’s Video Output, in to the BNC connector box Input jack, OR connect an
2)Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input Jack.
3)Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.
Connecting to an External Amplifier
INPUT
OVER
VIDEO
L/ MONO
R
Illustration of
AUDIO OUT | 75Ω |
(VHF/UHF) | |
L |
|
R |
|
12
7
1) | Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left Audio Input jack. |
|
| |
2) | Connect the red audio cable from the TV’s Right Audio Output jack to the Amplifier’s Right Audio Input jack. |
|
| |
• See also “TV Speaker” on page 33 for more information on using external speakers. | ||||
|
| 13 | ||
|
|
|
|