Initial Setup
Auto Tuner Setup
If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please skip ahead to “Channel Summary” to continue setting up your television.
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/- buttons) you will receive only clear, active channels.
Press the MENU button
❷ To AUTO TUNER SETUP
➛❿ To operate
➛❿ To choose CABLE or AIR
❷ To move to START
➛❿ To start Auto Tuner Setup
NOW
PROGRAMMING !
48
Programming will take approximately 1 to 2
minutes.
PROGRAMMING OVER!
• Noise Muting will not work during Auto Tuner Setup.
NOTE:
Initial Setup
Channel Summary
Channel Summary allows you to customize the
Press the MENU button
❷ To CHANNEL SUMMARY ➛❿ To operate
CH | ADD |
| : | CH | ADD |
|
|
| |||||||
|
| ||||||||||||||
01 |
|
|
|
|
| : | 06 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| ||||
02 |
| X |
|
| : | 07 |
| X |
|
| |||||
|
|
|
| ||||||||||||
03 |
|
|
|
|
| : | 08 |
|
|
|
|
|
|
| |
| X |
|
|
| X |
|
|
|
| ||||||
04 |
|
|
| : | 09 |
|
|
| |||||||
|
|
|
|
| |||||||||||
05 |
| X |
|
| : | 10 |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Channel Summary screen (above) will now be displayed with the channels set to scan marked with an "X". You can delete channels from the scan by removing the "X". If any channels were missed during Auto Tuner Setup and you wish to add them, you may by placing an "X" next to the channel number.
❷ To the ADD column
➛❿ To include or delete from scan
EXIT when finished
You can block access to a channel by activating the Channel Lock.
❷ To CHANNEL SUMMARY ➛❿ To operate
❷ To the Lock Column
ZERO to lock or unlock that channel
EXIT when finished
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
THIS CHANNEL IS LOCKED BY | To watch a channel that you have locked, enter the | |
CHANNEL GUARD. | Lock Code using the 10 key pad. | |
If the wrong code is entered, the message “INVALID | ||
PLEASE ENTER LOCK CODE BY | ||
LOCK CODE!” will flash on the screen: | ||
10 KEY PAD TO UNLOCK IT. | ||
The channel cannot be accessed until the correct | ||
NO. - - - - | ||
code is entered. | ||
|
•Some cable systems experience interference from radio frequencies on cable Channel 95. You may delete this channel from your scan by removing the “X” next to it on the Channel Summary screen shown on the next page.
20
11
•Once a channel has been unlocked, it will remain unlocked until the television is turned off.
•See also “Set Lock Code”, page 29.
21 | ||
|
|