JVC HV-29LPZ/-A, HV-29LPZ/HK Method of Setting, AUDIO, 6. STATUS, 9. Shippingoff & 0. BUS Free

Page 19

HV- 29LPZ

(3)Method of Setting

"Method of Setting 1.IF

[VCO] ･･･････････････････････････ * It must not adjust without signal

① 1 Key ･････････････････････････ Select 1.IF.

② 1 Key ････････････････････････ Select 1. VCO (CW)

Check the arrow position between the ABOVE REF. and BELOW REF.

③2 Key ･････････････････････････ Select 2.ATT ON/OFF (Strong Electric Field : ON / Generally Electric Field : OFF)

④ DISPLAY(DISP) Key････････････ Return to the SERVICE MENU screen.

"Method of setting 2.V/C, 4.DEF, 5.VSM PRESET, 7.PIP and 8.WB PRESET.

①2, 4, 5, 7 & 8 Key ･･･････････････ Select one from 2. V/C, 4. DEF, 5. VSM PRESET, 7.PIP & 8.WB PRESET.

② FUNCTION UP/DOWN Key ･･････ Select setting items.

③ FUNCTION -/+ ･････････････････ Set (adjust) the setting values of the setting items. ④ MENU (OK) Key ･･･････････････ Memorize the setting value.

(Before storing the setting values in memory, do not press the CH, TV, POWER ON / OFF key - if you do, the values will not be stored in memory.)

⑤DISPLAY (DISP) Key ･･･････････ Return to the SERVICE MENU screen.

"3. AUDIO, 6. STATUS, 9. SHIPPING(OFF) & 0. BUS FREE.

It is not requirement to adjustment.

(4)Release of SERVICE MENU

1)After completing the setting, return to the SERVICE MENU, then again press the DISPLAY (DISP) key.

No. 52012

19

Image 19

Contents HV-29LPZ HV-29LPZ HV-29LPZ HV-29LPZ ContentsSpecifications Safety Precautions Main Difference List FeaturesSync SEP PWB System Block DiagramMicom PWB Main PWBFront Terminal & Control FunctionsSUB-PICTURE Remote Control UnitDisassembly Procedure Specific Service InstructionsSpeaker BOX Control Base Micom Power & DEF PWB Claw ChassisHV- 29LPZ DomeCloth CRT Cabinet Change Table Removing the CRTSilicon grease product No. KS 650N CRT Change Table ApproxSystem Constant SET Setting item Setting value Setting Values of System Constant SET TableService Menu Setting Items Table Model No Setting itemSound User Setting Values TablePicture Setting Picture FeaturesMeasuring Instrument and Fixtures Service AdjustmentsBefore Starting Service Adjustment Adjustment ItemsFront Adjustment LocationsFron T TOPZoom Aspect Freq Basic Operation Service MenuTool of Service Menu Operation Service Menu ItemsService Menu Basic Operation of Service MenuVSM Preset WB Preset Shipping OFFService Menu Service Menu ScreenRelease of Service Menu Method of SettingAUDIO, 6. STATUS, 9. Shippingoff & 0. BUS Free DEF PWB AdjustmentChecking Item RGB BLKScreen VR Adjustment of Focus & ScreenAdjustment Signal FocusBright VSM Preset SettingStandard Soft Setting Values of VSM Preset Bright Sharp Colour TintVIDEO/CHROMA Circuit Adjustment PAL/SECAM/NTSC Colour Ⅰ Method of adjustment without measuring instrumentPAL/SECAM/NTSC Colour Ⅱ CRT SUB Tint Ⅱ CRT SUB TintFixed Value DEF. Circuit AdjustmentRegular Zoom 100Hz 60Hz pAspect Zoom Screen Regular Position AdjustmentShift SizeFixed Mode ADJ. Item RegularCenter AspectCOR-UP TrapezCOR-PIN Corner12.V-S.CR LIN13.V.LIN AUDIODo not adjust Setting item Variable range Fixed value Audio Circuit AdjustmentQuasi Purity Magnet PURITY, Convergence AdjustmentPurity Adjustment MagnetsFront View Static Convergence Adjustment# Resistors, capacitors, etc Replacement of Chip ComponentReplacement Steps Soldering IronHV- 29LPZ