JVC HV-29LPZ/HK Method of adjustment without measuring instrument, PAL/SECAM/NTSC Colour Ⅰ

HV- 29LPZ

	Item		Measuring		Test point	Adjustment part			Description
			instrument
Adjustment			Remote			7.COLOUR		[Method of adjustment without measuring instrument]
of SUB			control unit			(PAL/SECAM/NTSC)
COLOURⅠ
						PAL COLOUR		(PAL COLOUR)
								1.	Receive PAL broadcast.
								2.	Select 2.V/C from the SERVICE MENU.
								3.	Select 7.COLOUR with the function UP/DOWN key.
								4.	Set the initial setting value for PAL COLOUR with the function
									LEFT/RIGHT key.
								5.	If the colour is not the best with the initial set value, make fine
									adjustment until you get the best colour.
								6. Press the MENU/OK key and memorize the set value.
						SECAM COLOUR		(SECAM COLOUR)
								1. Receive a SECAM broadcast.
								2. Make fine adjustment of SECAM COLOUR in the same
									manner as for above.
						NTSC COLOUR		(NTSC 3.58 COLOUR)
								1. Input a NTSC 3.58MHz COMPOSITE VIDEO signal from the
				SERVICE MENU KEY					EXT terminal.
								2.	Make similar fine adjustment of NTSC 3.58 COLOUR in the
									same manner as for above.
		ZOOM						(NTSC 4.43 COLOUR)
							SERVICE
	(ASPECT)						MENU/	1.	Receive a NTSC 4.43MHz COMPOSITE VIDEO signal from
			key				&SYSTEM		the EXT terminal.
							CONSTANT
								2.	Make similar fine adjustment of 4.43 COLOUR in the same
	SETTING ITEM						key
									manner as for above.
	SELECT key
	(Numbers key)
	PICTURE
	CONTENTS
			key

PIP key

FUNCTION ke y

(UP/DOWN & LEFT/RIGHT key)

MENU/OK key

MEMORY (STORE)

key

24 No. 52012