JVC HV-29LPZ/EE, HV-29LPZ/HK, HV-29LPZ/-A Center, Aspect, Mode ADJ. Item Regular, Fixed, Ew-Pin

HV- 29LPZ

Item			Measuring	Test point	Adjustment part		Description
			instrument
Adjustment	of	Signal			3.H-CENT.	13. Receive a circle pattern signal.
H. CENTER		generator				14.	Select 3.H-CENT and set the initial setting value.
						15.	Adjust H-CENT to make C=D.
		Remote				16.	Press the MENU/OK key and memorize the set value.
		control unit
			C		D

Adjustment	4.H-SIZE	17. Receive a cross-hatch signal.
of H.SIZE		18.	Select 4.H-SIZE and set the initial setting value.
		19.	Adjust H-SIZE and make sure that the horizontal screen size
			of the picture size is in the bellow table.
		20.	Press the MENU/OK key and memorize the set value.
		21.	Input a NTSC VIDEO signal (60Hz) from the EXT terminal, and
			make sure that the horizontal screen size is in the below table.
		22.	Press the MENU/OK key and memorize the set value.

ASPECT		ZOOM
MODE
ADJ. ITEM	REGULAR	ZOOM	16 : 9
H-SIZE	92%	(FIXED)	(FIXED)

Adjustment		6.EW-PIN	23. Select 6.EW-PIN and set the initial setting value
of EW-PIN			24.	Adjust EW-PIN and make the 2nd.vertical lines at the left and
				right edges of the screen straight. Also make sure that the 3rd
				vertical lines are straight.
	Straight
			25.	Press the MENU/OK key and memorize the set value.

No. 52012 29