JVC HV-29WH11 manual Picture Features menu, „ White Balance, „ Digital VNR

Page 16

Using the TV’s menu

COLOUR

You can adjust the picture colour. 2 : lighter

3 : deeper

TINT

You can adjust the picture tint. 2 : reddish

3 : greenish

•You can change the TINT setting (picture tint) only when the colour system is NTSC 3.58 or NTSC 4.43.

•You cannot select the TINT function when receiving the Progressive video signal (525P signal).

To return to the default settings in each

PICTURE MODE:

Press the blue button. This will return the picture settings in the currently chosen PICTURE MODE to the default settings, and stores them in the PICTURE MODE again.

„WHITE BALANCE

You can select one of three WHITE BALANCE modes (three tones of white) to adjust the white balance of the picture. Since white is the colour which is used as a reference for all the other colours, changing the WHITE BALANCE mode affects the appearance of all the other colours on the screen.

COOL:

A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture.

MID:

The normal white colour.

WARM:

A radish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films.

•You cannot select the WHITE BALANCE function in the 16:9 mode of the ZOOM function.

PICTURE FEATURES menu

„DIGITAL VNR

The DIGITAL VNR function cuts down the amount of noise in the original picture.

AUTO:

The TV will be automatically adjust the level of the DIGITAL VNR effect to match the amount of noise in the picture, giving you the best possible picture.

•If you set the DIGITAL VNR effect too high it can make the picture less sharp. It is recommended to use the AUTO setting if you can.

MAX:

The level of the DIGITAL VNR effect is set to the maximum. If you set the DIGITAL VNR function to AUTO but still notice some noise, change the setting from AUTO to MAX.

•The MAX setting is not suitable for high-quality pictures which contain a lot of noise.

OFF:

The level of the DIGITAL VNR effect is set to OFF.

MIN:

The level of the DIGITAL VNR effect is set to the minimum. If you set the DIGITAL VNR function to AUTO but feel that the sharpness of the original picture has not been reproduced fully, change the setting from AUTO to MIN.

•The MIN setting is not suitable for low- quality pictures which contain a lot of noise.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents HV-29WH11 15 cm Connecting the aerial and VCR Setting up your TVIf not connecting a VCR see Fig. a Connecting the power cord Putting the batteries into the remote controlMaking the initial settings Press the main power button on the TVNow, setting up is complete. Please enjoy your new JVC TV TV buttons and functions VIDEO-1 terminal VIDEO-2 terminalVIDEO-3/COMPONENT terminal = Output terminal ~Remote control buttons and functions Press the Power buttonPress the VOLUME-/+ buttons Watch images from an external devicePicture Mode button Muting buttonZoom button Cinema Surround buttonRETURN+ button Svt/u buttonRETURN+ function Return functionDisplay button Choose a TV channel or a Video terminalColour System button Sound System button„ Favorite channel Registration Recalling the favorite channelColour System Sound SystemSetting the picture effect Showing the favorite channelsUsing the TV’s menu Basic operationPress the MENU/OK button to display the Menu main menu Press the 6 buttons to choose a functionPicture Setting menu „ Picture Mode„ Adjusting the picture Operation with the buttons on„ White Balance Picture Features menu„ Digital VNR „ Pull Down „ DigiPureDigipure function „ Zoom „ Colour System„ Picture Tilt „ Favorite CH Setting „ Video SettingSet the picture effect OptionsSound Setting menu „ Adjusting the sound„ Stereo BassFeatures menu „ AI Volume„ Sleep Timer To cancel this functionTo cancel this function Press the blue button again „ Blue Back„ Child Lock „ Channel Guard„ VIDEO-3 Setting „ Auto ShutoffVideo ComponentInstall menu „ Language„ Auto Program Choose Auto PROGRAM, then press the MENU/OK button„ EDIT/MANUAL To cancel the Move function Press the Display buttonFunctions To cancel the Manual function To cancel the ID functionPress the green or red button to search for a TV channel To cancel the Insert function Press the Display button PreparationCH/CC number ChannelBefore connecting anything „ Connecting the external DevicesAdditional preparation Connecting devices to the Output terminal Connecting methodsConnecting Headphones Troubleshooting „ If you cannot turn on the TV„ No picture/No sound „ Poor picture„ Poor sound „ Operation disabled„ Other concerns Page Specifications Design and specifications subject to change without notice
Top Page Image Contents