JVC HV-29WH11 manual „ Poor sound, „ Operation disabled, „ Other concerns

Page 32

Troubleshooting

When a white and bright still image (such as a white dress) is displayed on the screen, the white part may look as if it were coloured.

It is a phenomenon unavoidable due to the nature of the picture tube itself, and not due to a TV failure.

When the picture disappears from the screen, the unnatural colours will also disappear.

When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal, and not because of malfunction.

„Poor sound

Have you adjusted BASS or TREBLE properly? If not, follow the description “Adjusting the sound” on page 20 to try to adjust them properly.

When the TV channel reception is poor, it can be hard to hear the stereo or bilingual sound. In this case, follow the description “STEREO / I•II” on page 20 to hear the sound more easily by changing it to a mono sound.

„Operation disabled

Have the batteries of the remote control become exhausted? Follow the description “Putting the batteries into the remote control” on page 4 and replace them with new batteries to try solve the problem.

Have you attempted to use the remote control at the sides or rear of the TV or at a location more than seven meters apart from the TV location? Operate the remote control in the front of your TV or a location less than seven meters from your TV to try to solve the problem.

Is the CHILD LOCK function set to ON? If the CHILD LOCK function is set to ON, you cannot operate the TV with the front control buttons of the TV. Follow the description “CHILD LOCK” on page 22 to try to set the CHILD LOCK function to OFF.

If the TV operation becomes disabled suddenly, press the Main power button on the TV and turn off the main power. Try to press the Main power button again to turn on the main power. If the TV returns to a normal state, it is not a failure.

The following function does not operate when receiving Progressive video signal (525P signal).

MENU function:

TINT and PULL DOWN

„Other concerns

When the AUTO SHUTOFF function operates, the TV is automatically turned off.

If the TV is turned off suddenly, try to press the POWER button to turn on the TV once again. At this time, if the TV resumes a normal state, there is no problem.

If you bring a magnetized device such as a speaker near to your TV, a picture may be warped or unnatural colours appear at the corners of the screen. In this case, keep the device apart from your TV. If the speaker causes such phenomena, use the magnetic- shielded speaker instead.

32

Image 32
Contents HV-29WH11 15 cm If not connecting a VCR see Fig. a Setting up your TVConnecting the aerial and VCR Connecting the power cord Putting the batteries into the remote controlMaking the initial settings Press the main power button on the TVNow, setting up is complete. Please enjoy your new JVC TV TV buttons and functions VIDEO-1 terminal VIDEO-2 terminalVIDEO-3/COMPONENT terminal = Output terminal ~Remote control buttons and functions Press the Power buttonPress the VOLUME-/+ buttons Watch images from an external devicePicture Mode button Muting buttonZoom button Cinema Surround buttonRETURN+ button Svt/u buttonRETURN+ function Return functionDisplay button Choose a TV channel or a Video terminalColour System button Sound System button„ Favorite channel Registration Recalling the favorite channelColour System Sound SystemSetting the picture effect Showing the favorite channelsUsing the TV’s menu Basic operationPress the MENU/OK button to display the Menu main menu Press the 6 buttons to choose a functionPicture Setting menu „ Picture Mode„ Adjusting the picture Operation with the buttons on„ Digital VNR Picture Features menu„ White Balance Digipure function „ DigiPure„ Pull Down „ Picture Tilt „ Colour System„ Zoom „ Favorite CH Setting „ Video SettingSet the picture effect OptionsSound Setting menu „ Adjusting the sound„ Stereo BassFeatures menu „ AI Volume„ Sleep Timer To cancel this functionTo cancel this function Press the blue button again „ Blue Back„ Child Lock „ Channel Guard„ VIDEO-3 Setting „ Auto ShutoffVideo ComponentInstall menu „ Language„ Auto Program Choose Auto PROGRAM, then press the MENU/OK buttonFunctions To cancel the Move function Press the Display button„ EDIT/MANUAL Press the green or red button to search for a TV channel To cancel the ID functionTo cancel the Manual function To cancel the Insert function Press the Display button PreparationCH/CC number ChannelAdditional preparation „ Connecting the external DevicesBefore connecting anything Connecting Headphones Connecting methodsConnecting devices to the Output terminal Troubleshooting „ If you cannot turn on the TV„ No picture/No sound „ Poor picture„ Other concerns „ Operation disabled„ Poor sound Page Specifications Design and specifications subject to change without notice