JVC 0902-NIC-JET Connecting other devices, Connect the power cord to the AC outlet, DVD player

Preparation

4 Connecting other devices

If you are not connecting any other devices, skip step 4 and perform step 5.

•Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.

•The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV. You can dub them onto the VCR connected to the OUTPUT terminal.

(The OUTPUT terminal cannot output component video signals. Also it cannot output any signals when the TV is turned off.)

•Connect components outputting a component signal (Y/CB/CR signal), such as a DVD player, to the VIDEO-2 terminal, and set VIDEO-2 SET function to “COMPONENT”. (See page 14.)

•The following illustrations are for the AV-29W83. Your TV’s front and rear pannels may not look exactly like the illustrations.

Front

Camcorder or TV game

Headphones

Rear

V L/MONO R

IN (VIDEO-3)

VIDEO-1	COMPONENT
	(VIDEO-2)	OUTPUT
INPUT
	INPUT

V	Y/V	V
L/ MONO	CB	L/ MONO L

VCR (for playing)

DVD player (composite signals)

VCR (for recording)

R

CR R R

DVD player

(component video signals)

5 Connect the power cord to the AC outlet

Operate only from the power source indicated on the rear of the TV.

5