BenQ MX818ST, MX820ST, MX819ST Magnifying and searching for details, Selecting the aspect ratio

Page 26

2.Press to highlight Color Space Conversion and press / to select a suitable color space.

This function is only available when the HDMI-input port is in use.

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture.

•Using the remote control

1.Press ZOOM+/ZOOM- to display the Zoom bar. Press ZOOM+ to magnify the center of the picture. Press the key repeatedly until the picture size is suitable for your need.

2.Use the directional arrows ( , , , ) on the projector or remote control to navigate the picture.

3.To restore the picture to its original size, press AUTO. You can also press ZOOM-

. When the key is pressed again, the picture is further reduced until it is restored to the original size.

•Using the OSD menu

1.Press MENU/EXIT and then press / until the DISPLAY menu is highlighted.

2.Press to highlight Digital Zoom and press MODE/ENTER. The Zoom bar displays.

3.Press repeatedly to magnify the picture to a desired size.

4.To navigate the picture, press MODE/ENTER to switch to the panning mode and

press the directional arrows ( , , , ) on the projector or remote control to navigate the picture.

5.To reduce size of the picture, press MODE/ENTER to switch back to the zoom in/ out function, and press AUTO to restore the picture to its original size. You can

also press repeatedly until it is restored to the original size.

The picture can only be navigated after it is magnified. You can further magnify the picture while searching for details.

Selecting the aspect ratio

The “aspect ratio” is the ratio of the image width to the image height. Most analog TV and some computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio.

With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input signal.

To change the projected picture ratio (no matter what aspect the source is):

•Using the remote control

1.Press ASPECT to show the current setting.

2.Press ASPECT repeatedly to select an aspect ratio to suit the format of the video signal and your display requirements.

•Using the OSD menu

1.Press MENU/EXIT and then press / until the DISPLAY menu is highlighted.

2.Press to highlight Aspect Ratio.

3.Press / to select an aspect ratio to suit the format of the video signal and your display requirements.

26 Operation

Page 25 Page 27
Image 26
Page 25 Page 27
Contents MX818ST/MX819ST/MW820ST Table of contents Important safety instructions Safety InstructionsSafety Instructions 3000 m Feet Ceiling mounting the projector Projector features IntroductionShipping contents Projector exterior view Front/upper side Rear/lower sideControls and functions Projector+/PAGE Remote controlON/ OFF Network No function AutoRemote control effective range Operating the Laser pointerReplacing the remote control batteries Front Table Positioning your projectorChoosing a location Front CeilingProjection dimensions Obtaining a preferred projected image sizeMW820ST Connection ConnectionTerminal name Terminal appearance Connecting video source devicesConnecting audio BestOperation Starting up the projectorAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image clarityCorrecting keystone Using the menus Below is the overview of the OSD menuSetting a password Using a security cable lockUtilizing the password function Highlight Change Security Settings and press MODE/ENTERChanging the password If you forget the passwordEntering the password recall procedure Changing Color Space Switching input signalDisabling the password function Magnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Setting the User 1/User 2 mode Using Wall ColorSelecting a picture mode Go to the Picture Picture Mode menuFine-tuning the image quality in user modes Setting a preferred color temperature 3D Color ManagementSelection Description Setting the presentation timerResetting current or all picture modes Freezing the image To cancel the timer, perform the following stepsRemote paging operations Top-Left Bottom-Left Top-Right Bottom-RightLocking control keys To activate the High Altitude ModeHiding the image Operating in a high altitude environmentAdjusting the sound level Adjusting the soundUsing the test pattern Turning off the Power On/Off Ring ToneUsing the teaching templates Direct power off Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system Wall ColorBasic Advanced Description of each menu Color Temperature Picture ModeTemperature Fine Tuning 3D ColorSearch TimerInstallation Color SpaceOperation System Setup Basic menuFunction Description RemoteAudio System Setup Advanced menu Function Description HighAltitude LampStandby System Setup Advanced menu Function DescriptionReset All NetworkSystem Information menu Function DescriptionCurrent StatusMaintenance Care of the projectorExtending lamp life Lamp informationGetting to know the lamp hour Timing of replacing the lamp Status MessageReplacing the lamp Replace the lamp cover on the projector Resetting the lamp timer Tighten the screws that secures the lamp CoverLamp events IndicatorsLight Status & Description Power events Thermal eventsTroubleshooting Specifications Projector specificationsDimensions Ceiling mount installationWall mount installation Minimum installation requirements1171 1181 Minimum Ceiling Height mm = f + H + b + 60 + 274+ c ScreenKHz Timing chartSupported timing for PC input Resolution Mode Frequency KHz MHz Supported timing for Hdmi Hdcp inputSupported timing for Component-YPbPrinput TimingSupported timing for Video and S-Video inputs NtscCopyright Warranty and Copyright informationLimited warranty Disclaimer

MX819ST, MX820ST, MX818ST specifications

BenQ has been a prominent player in the projector market, catering to various consumer needs with innovative and high-quality solutions. Among their notable offerings are the BenQ MX818ST, MX820ST, and MX819ST projectors, specifically designed for educational institutions and small to medium-sized business environments. These models are a part of BenQ's commitment to enhancing visual learning and presentations.

The BenQ MX818ST is a short-throw projector, capable of delivering large images from a close distance. This feature proves especially beneficial in classrooms where space may be limited. With a brightness level of up to 3,100 ANSI lumens and a resolution of XGA (1024x768), it provides crisp and clear visuals, making it suitable for various lighting conditions. One of its core technologies is the DLP (Digital Light Processing) technology, which ensures vibrant colors and sharp pictures, elevating the viewing experience during lessons or presentations.

Following closely, the MX820ST builds on the strengths of the MX818ST while adding enhanced features like a higher brightness level of 3300 ANSI lumens. The MX820ST also includes BenQ’s BrightView and high contrast ratio to improve visibility and clarity, ensuring that every detail stands out regardless of ambient light. Equipped with a 1.02-1.23:1 throw ratio, it allows users to project a large screen from mere feet away. Additionally, the projector boasts multiple connectivity options, including HDMI and VGA, facilitating compatibility with various devices.

The MX819ST is another standout in this lineup, offering similar specifications to its siblings but with added features that enhance usability. This model includes improved color performance thanks to BenQ's color calibration technology, ensuring consistency in image presentation. Moreover, it offers a 10,000-hour lamp life, which reduces maintenance costs and improves efficiency by minimizing the frequency of lamp replacements. Its portability and flexible installation options make it a viable choice for both stationary and mobile presentations.

All three models are designed with user-friendly interfaces, ensuring seamless operation whether in a classroom or a boardroom. They also come equipped with advanced network management features, allowing institutions and companies to manage projector settings remotely. With eco-friendly technologies, such as energy-saving modes, these projectors help minimize environmental impact.

In summary, the BenQ MX818ST, MX820ST, and MX819ST projectors stand out in the market due to their combination of advanced technologies, user-friendly features, and robust performance. They cater to the needs of educational and business environments, providing high-quality presentations that make a lasting impact.
Top Page Image Contents