DirecTV D10 Basic Connection, Using RF Coaxial cables for all connections, To view VCR recordings

Page 11

Connections & Setup

Basic Connection

Using RF Coaxial cables for all connections

This connection provides standard picture quality. This connection is only recommended for use with TVs that do not have S-Video or A/V input jacks.

What you will need (see pages 2 and 3 for descriptions of these cables):

•Two (2) RF coaxial cables

•One (1) telephone line cord

•RG-6 coaxial cable line fed from a digital satellite antenna

•RF coaxial cable line from a standard TV antenna or cable outlet

Making the Connection

1.Connect the satellite dish antenna feed (RG-6 coaxial cable) to the SATELLITE IN jack on the DIRECTV® Receiver.

2.Connect one end of an RF coaxial cable to the OUT TO TV jack on the DIRECTV Receiver, and the other end to the antenna input jack on the VCR.

3.Connect one end of an RF coaxial cable to the antenna output jack on the VCR, and the other end to the TV’s antenna input jack.

4.Connect the cable box or off-air antenna feed (RF coaxial cable) to the OFF AIR IN jack on the DIRECTV Receiver.

5.Connect one end of the supplied telephone line cord to the PHONE JACK on the back of the DIRECTV Receiver, and the other end to an RJ11-type modular phone jack (the most common type of phone jack).

6.Set the CHANNEL 3-4 switch to the channel you want to use to watch DIRECTV® programming on your TV (try to use a channel that's "empty" in your area).

Go to page 10

Using Your Components

To watch DIRECTV programming:

Tune the TV to the DIRECTV Receiver’s output channel (either channel 3 or 4, matching how you've set the CHANNEL 3-4 switch on the back of the DIRECTV Receiver).

To record DIRECTV programming:

Tune the DIRECTV Receiver to the desired channel. Then set your VCR to record on the proper input channel (video line input if using A/V cables to connect the VCR to the DIRECTV Receiver, channel 3 or 4 if using RF coaxial cable).

To watch cable/off-air programming:

Turn off the DIRECTV Receiver. Tune the TV to the cable or off-air channel you want to watch.

To record cable/off-air programming:

Turn off the DIRECTV Receiver. Tune the TV to channel 3 or 4 (whichever is set on the VCR as its output channel) to watch the signal from the VCR. Tune the VCR to the cable/off-air channel you want to watch. Begin VCR recording as usual.

To view VCR recordings:

Tune the TV to channel 3 or 4 (whichever is set on the VCR as its output channel). Begin VCR playback as usual.

Chapter 1

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Directv Receiver Users Guide Product Information Important InformationTable of Contents Jacks and Cables Things To Consider Before You Connect ComponentsRF Coaxial Cable F-type Connections & SetupInsert Your Access Card Choose Your ConnectionVCR Making the Connection Go to Using Your ComponentsExcellent Connection Directv Go to Using Your ComponentsVery Good Connection Making the ConnectionDirectv Receiver To view VCR recordings Using RF Coaxial cables for all connectionsBasic Connection Directv Receiver Back Panel Place Batteries in the Remote ControlBack Panel Jacks and Switches in alphabetical order Highlight and select navigation has two steps Using Highlight and SelectComplete the Guided Setup Plug in and Turn on the ReceiverOrder Programming To reset the receiverDirectv News & Info Remote Control Buttons Using the Remote ControlFront of the Directv Receiver Using the Remote ControlRemote Control Setup Using the Remote Control to Operate Other ComponentsControlling a Second Directv Receiver Operating Other ComponentsModes of Operation Programming the Remote to Operate Your TVDisplaying the Quick Menu in the Guide Program GuideDisplaying the Program Guide Getting Around In the Guide Features of the Directv ReceiverIcons of the Channel Banner Channel BannerCategory Sort SettingsQuick Menu Quick Menu in the GuideTo move to a different time in the program guide Date & TimeFavorites Find ByParental Controls Caller ID & MessagesRetracing Your Steps Using the Menu SystemQuick Menu Items Exiting Quick Menus and Menu ScreensSetup Using On-Screen MenusSettings Satellite Test Signal StrengthRepeat Satellite Dish Setup Reset Satellite InfoDisplay RemoteAudio Scheduler To set your preferred audio language Audio OptionsManual To choose the current channel list To set up a new custom channel listFind By FavoritesCaller ID Previous ChannelsCaller ID & Messages Receiving Calls Setting Up Caller IDCaller ID Indicators Deleting Calls To access the call logTurning Notification On or Off Call LogMessages Edit SettingsTo Edit Your Parental Control Settings Parental ControlsTemporarily Unlocking the System Lock NowUnlock Now RatingsTV-Y7 MoviesTV-14 Other Content ThemesTo block program content To unblock program contentHours Lock NowChannel Blocks SpendingWrong picture TroubleshootingProblems with Caller ID Screen goes blank during Satellite Data AcquisitionOther Information Finding the TV’s Video Line Input Fine-Tuning the SignalRunning the System Test Limited 90 DAY Warranty Directv Protection Plan FCC Declaration of Conformity FCC Customer InformationIndex Tocom

D10 specifications

The DirecTV D10 is a satellite television receiver that played a significant role in the evolution of digital broadcasting. Launched in the early 2000s, the D10 was designed with user-friendly features and advanced technologies that made satellite TV accessible and enjoyable for many households.

One of the standout features of the DirecTV D10 is its ability to receive over 150 channels, including a variety of local and national broadcasts. This wide range of programming options catered to diverse viewer preferences, covering genres such as sports, news, movies, and family entertainment. With its capability to receive both standard and high-definition channels, the D10 positioned itself as a versatile option for consumers looking to enjoy a diverse array of content.

The DirecTV D10 utilized advanced digital MPEG-2 technology, which allowed for superior video and audio quality. This technology ensured that viewers experienced clear images and rich sound, enhancing the overall viewing experience. The D10 also featured a built-in electronic programming guide (EPG), making it easier for users to navigate and discover new shows. The EPG provided detailed information about programming schedules, facilitating more efficient planning for viewers.

Another notable characteristic of the D10 was its compact design, allowing it to fit seamlessly into various home entertainment setups. The receiver was equipped with multiple output options, including RCA and S-Video connections, ensuring compatibility with a wide range of television models. Its user-friendly remote control was designed for intuitive navigation, making it easy for users of all ages to operate the device.

The DirecTV D10 also offered features such as parental controls, allowing families to manage content access, as well as the capability to add additional receivers, enhancing the viewing experience across multiple rooms in a home. Although the D10 has since been succeeded by more advanced models, its legacy remains impactful in the realm of satellite television.

In summary, the DirecTV D10 served as a pivotal receiver that combined multiple features, cutting-edge technology, and user-friendly characteristics, drawing in a broad audience. It helped pave the way for the modern era of digital television, making it an important piece of broadcasting history.
Top Page Image Contents