Canon LV-X6, LV-7250 manual Turning on the Projector, Remove the lens cap, Second

Page 29

3. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

￿Turning on the Projector

NOTE:

The projector has two power switches: a main power switch and a POWER button.

When plugging in or unplugging the supplied power cord, make sure that the main power switch is pushed to the off () position. Failure to do so may cause damage to the projector.

1.To turn on the main power to the projector, press the Main Power switch to the on position ( I ).

The POWER indicator will light orange.

See the Power Indicator section on page 56 for more details.

2. Remove the lens cap.

WARNING

 

W

PO

ER

LAMP

-

3. Press the POWER button on the projector cabinet or

WARNING

POWER INFO.

the POWER button on the remote control for about 1

second.

The POWER indicator will turn to green and the projector will become ready to use.

After you turn on your projector, ensure that the computer or video source is turned on and that your lens cap is removed.

NOTE: If you turn on the projector immediately after the lamp is turned off or when the temperature is high, the fans runs without displaying an image for some time and then the projector will display the image.

CAUTION:

The projector cannot be turned off for 60 seconds after the lamp is turned on and while the POWER indicator is blinking green. Doing so could cause premature lamp failure.

PO

W

 

 

 

ER

IN

IMAGE

INPUT AUTO PC

 

 

AU

ASPECT

NO SHOW

 

 

 

MENU

 

LAMP

Standby

Blinking

Power On

WARNING

W

WARNING

W

WARNING

W

 

 

 

 

PO ER

 

PO ER

 

PO ER

LAMP

 

LAMP

 

LAMP

 

Steady or-

Blinking

Steady

ange light

green light

green light

See page 56 for more details.

20

Image 29
Contents LV-7250/LV-X6 Precautions Safety CautionsFederal Communication Commission Notice Important InformationCanadian Radio Interference Regulations Réglementation canadienne sur les intérferences radioLamp Handling Precautions Installation Important SafeguardsFire and Shock Precautions Do Not Use in the Following EnvironmentsImportant Information Remote Control Precautions Use Caution When Carrying or Transporting the ProjectorTable of Contents Viii For LV-7250 only Whats in the Box?Introduction to the Projector Features youll enjoyIntroduction Congratulations on Your Purchase of The ProjectorIntroduction Rear Part Names of the ProjectorFront/Top To turn the logo upside down, follow the steps below Introduction BottomPush one end of the logo gently Release your hold and turn the logo upside downSelecting from Input List Introduction Top FeaturesDetecting the Signal Automatically Introduction Terminal Panel Features LV-7250 Part Names of the Remote Control 17. D. Zoom + Button / Button Not available on LV-X6Freeze Button Click Button Not available on LV-X6Operating Range for Wireless Remote Control Introduction Battery InstallationInstallation and Connections Installation and Connections Setting Up the Screen and the ProjectorSelecting a Location Throw Distance and Screen SizeReflecting the Image LV-7250 LV-X6 Making ConnectionsVideo equipment such as DVD player Installation and Connections To connect Scart output RGBInstallation and Connections Connecting an External Monitor Audio Analog IN-1 Video Audio VID Power button on the remote control for about Press the Power button on the projector cabinet orTurning on the Projector Remove the lens capTo select a menu language, follow these steps Projecting an Image Basic OperationSelecting a Source Detecting the Signal AutomaticallyAdjust the Tilt Foot Adjusting the Picture Size and PositionRear foot height can be adjusted up to 10 mm/0.4 inch Lift the front edge of the projectorFocus Projecting an Image Basic Operation ZoomAdjusting with buttons on the cabinet Adjusting with the Auto Keystone Function LV-7250 onlyAdjusting with the Remote Control Correcting Keystone DistortionPress the Menu button. The menu will be closed Automatically Optimizing on RGB Image Turning Up or Down VolumeAdjusting the Image Using Auto PC adjustment To turn off the projector Turning off the ProjectorPreparation Make sure that the projector is turned off After UseEnlarging and Moving a Picture Turning off the Image and SoundFreezing a Picture Convenient Features Using the Remote Mouse Receiver LV-7250 onlyConnecting the remote mouse receiver to your computer When operating a computer via the remote mouse receiverAbout Drag Mode Preventing the Unauthorized Use of the Projector To enable the Password functionTo disable the Password function To turn on the projector when Password is enabledType in your password and press the OK button Using the Menus Using On-Screen MenuFor Adjusting items Slide bar Using On-Screen MenuFor Selecting items Solid triangle For Selecting items Radio buttonMenu Elements Indicates the Key Lock is enabledList of Menu Items Image adjustmentReset Image mode Menu Descriptions & Functions Image adjustmentDetail settings Selecting Reference Setting Reference Selecting Gamma Correction Mode GammaUsing On-Screen Menu Adjusting White Balance White balance Menu Descriptions & Functions Display settingsReset Selecting Aspect Ratio AspectCopyright Selecting Wall Color Correction Mode Screen color Menu Descriptions & Functions SetupGeneral LV-7250 Enabling Auto Keystone Auto keystone LV-7250 onlySelecting Menu Language Language Using On-Screen Menu Selecting Lamp Mode Lamp modeDisabling the Cabinet Buttons Key lock Selecting Communication Speed Communication speedSetting Auto Adjust Auto PC adjustment Selecting a Color for Background No signal screenEnabling Direct Power on Direct power on Enabling Power Management Power managementEnabling Key Sound and Error Sound Beep Using On-Screen Menu Enabling Fan Speed Mode Fan modeInput signal select Selecting Signal Format Enabling the deinterlace DeinterlaceUsage time Input signalMenu Descriptions & Functions Information Using On-Screen Menu Version Menu Descriptions & Functions ResetResetting settings and adjustments Reset Clearing Lamp Hour Meter Lamp counterTo replace the filter sponge Cleaning or Replacing the FilterTo clean the air-filter Maintenance Cleaning the Cabinet and the LensTo replace the lamp Replacing the LampRemove the lamp Remove the lamp coverInsert a new lamp until the lamp is plugged into the socket Indicator Messages TroubleshootingAppendix Problem Check These ItemsPower on process for the projector and the PC Optical SpecificationsLV-7250 2000 lm LV-X6 1500 lmFor Europe Appendix MechanicalCabinet Dimensions Pin No RGB Signal Analog YCbCr Signal Pin Assignments of D-Sub Analog Input ConnectorMini D-Sub 15 Pin Connector Compatible Input Signal List Relationship between Screen Size and Projection distance PC Control Codes and Cable Connection Service Port Mini DIN-8PPC Control Codes Cable ConnectionPower Troubleshooting Check ListVideo and Audio OtherSignal cable Installation environmentComputer Video equipmentCanon U. S. A., INC

LV-X6, LV-7250 specifications

The Canon LV-7250 and LV-X6 are advanced projector models renowned for their quality, versatility, and ease of use. Designed primarily for educational and corporate environments, these projectors combine high-performance features with user-friendly technology, making them ideal for presentations, lectures, and business meetings.

Starting with the Canon LV-7250, this model boasts a bright 2600 ANSI lumens lamp, ensuring clear and vivid images even in well-lit environments. Its native XGA resolution (1024 x 768) guarantees sharp text and detailed graphics, crucial for presentations and visual displays. The projector supports a variety of input options, including HDMI and standard VGA, making connectivity to various devices seamless. Additionally, the LV-7250 includes a 1.2x optical zoom and keystone correction features, allowing for flexible setup and easy alignment of images.

The Canon LV-X6, on the other hand, elevates the projection experience with its enhanced brightness of 3000 ANSI lumens and native SVGA resolution (800 x 600). This model is specifically designed for larger venues, where higher luminosity is essential. The LV-X6 features multiple connectivity options, including HDMI, USB, and composite video, accommodating different presentation formats and devices.

Both models incorporate advanced DLP technology, offering high contrast ratios that enhance the clarity and depth of projected images. They also ensure long-lasting performance with an extended lamp life of up to 6000 hours in Eco mode, reducing the need for frequent replacements and enhancing cost-effectiveness.

In terms of portability, both projectors are lightweight and compact, making them easy to transport between locations. They come equipped with built-in speakers, providing clear audio playback without the need for external sound systems, although connections for separate audio systems are available for enhanced sound quality.

The user-friendly interface and remote control availability further simplify operation, allowing users to navigate menus swiftly and access features easily. A robust cooling system ensures efficient thermal management, keeping the projectors operational for extended periods without overheating.

Overall, the Canon LV-7250 and LV-X6 models epitomize reliability, performance, and practicality, making them excellent choices for anyone seeking high-quality projection solutions in professional settings.