Canon LV-X6, LV-7250 manual Remove the lamp cover

Page 63

6. Maintenance

2.Remove the lamp cover.

(1)Press firmly and slide the lamp cover by 1 cm (0.4”)

• Do not force to pull the lamp cover

(2)Push two catches on both sides lightly ￿ to slide the lamp cover slowly ￿ until the catch is seen and then pull up the lamp cover ￿.

3

1

1

2

 

3.Remove the lamp.

(1)Loosen the two screws securing the lamp until the phillips screwdriver goes into a freewheeling condition. The two screws are not removable.

NOTE: Do not remove any screws except these two screws.

(2)Remove the lamp by holding it.

CAUTION:

DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Before handling, turn the projector off, wait until the cooling fans stop, turn off the main power switch, disconnect the power cord and then allow at least 60 minutes for the lamp to cool.

Interlock

NOTE: There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock.

54

Page 62 Page 64
Image 63
Page 62 Page 64
Contents LV-7250/LV-X6 Precautions Safety CautionsRéglementation canadienne sur les intérferences radio Important InformationFederal Communication Commission Notice Canadian Radio Interference RegulationsLamp Handling Precautions Do Not Use in the Following Environments Important SafeguardsInstallation Fire and Shock PrecautionsImportant Information Remote Control Precautions Use Caution When Carrying or Transporting the ProjectorTable of Contents Viii For LV-7250 only Whats in the Box?Congratulations on Your Purchase of The Projector Features youll enjoyIntroduction to the Projector IntroductionIntroduction Part Names of the Projector Front/TopRear Release your hold and turn the logo upside down Introduction BottomTo turn the logo upside down, follow the steps below Push one end of the logo gentlyIntroduction Top Features Detecting the Signal AutomaticallySelecting from Input List Introduction Terminal Panel Features LV-7250 Part Names of the Remote Control Click Button Not available on LV-X6 / Button Not available on LV-X617. D. Zoom + Button Freeze ButtonOperating Range for Wireless Remote Control Introduction Battery InstallationInstallation and Connections Throw Distance and Screen Size Setting Up the Screen and the ProjectorInstallation and Connections Selecting a LocationReflecting the Image LV-7250 LV-X6 Making ConnectionsVideo equipment such as DVD player Installation and Connections To connect Scart output RGBInstallation and Connections Connecting an External Monitor Audio Analog IN-1 Video Audio VID Remove the lens cap Press the Power button on the projector cabinet orPower button on the remote control for about Turning on the ProjectorTo select a menu language, follow these steps Projecting an Image Basic OperationSelecting a Source Detecting the Signal AutomaticallyLift the front edge of the projector Adjusting the Picture Size and PositionAdjust the Tilt Foot Rear foot height can be adjusted up to 10 mm/0.4 inchFocus Projecting an Image Basic Operation ZoomCorrecting Keystone Distortion Adjusting with the Auto Keystone Function LV-7250 onlyAdjusting with buttons on the cabinet Adjusting with the Remote ControlPress the Menu button. The menu will be closed Turning Up or Down Volume Adjusting the Image Using Auto PC adjustmentAutomatically Optimizing on RGB Image To turn off the projector Turning off the ProjectorPreparation Make sure that the projector is turned off After UseTurning off the Image and Sound Freezing a PictureEnlarging and Moving a Picture When operating a computer via the remote mouse receiver Using the Remote Mouse Receiver LV-7250 onlyConvenient Features Connecting the remote mouse receiver to your computerAbout Drag Mode Preventing the Unauthorized Use of the Projector To enable the Password functionTo disable the Password function To turn on the projector when Password is enabledType in your password and press the OK button Using the Menus Using On-Screen MenuFor Selecting items Radio button Using On-Screen MenuFor Adjusting items Slide bar For Selecting items Solid triangleMenu Elements Indicates the Key Lock is enabledList of Menu Items Image adjustmentReset Selecting Gamma Correction Mode Gamma Menu Descriptions & Functions Image adjustmentImage mode Detail settings Selecting Reference Setting ReferenceSelecting Aspect Ratio Aspect Menu Descriptions & Functions Display settingsUsing On-Screen Menu Adjusting White Balance White balance ResetCopyright Enabling Auto Keystone Auto keystone LV-7250 only Menu Descriptions & Functions SetupSelecting Wall Color Correction Mode Screen color General LV-7250Selecting Menu Language Language Using On-Screen Menu Selecting Lamp Mode Lamp modeDisabling the Cabinet Buttons Key lock Selecting Communication Speed Communication speedEnabling Power Management Power management Selecting a Color for Background No signal screenSetting Auto Adjust Auto PC adjustment Enabling Direct Power on Direct power onEnabling the deinterlace Deinterlace Using On-Screen Menu Enabling Fan Speed Mode Fan modeEnabling Key Sound and Error Sound Beep Input signal select Selecting Signal FormatInput signal Menu Descriptions & Functions InformationUsage time Clearing Lamp Hour Meter Lamp counter Menu Descriptions & Functions ResetUsing On-Screen Menu Version Resetting settings and adjustments ResetCleaning or Replacing the Filter To clean the air-filterTo replace the filter sponge Maintenance Cleaning the Cabinet and the LensTo replace the lamp Replacing the LampRemove the lamp Remove the lamp coverInsert a new lamp until the lamp is plugged into the socket Indicator Messages TroubleshootingAppendix Problem Check These ItemsPower on process for the projector and the PC LV-X6 1500 lm SpecificationsOptical LV-7250 2000 lmFor Europe Appendix MechanicalCabinet Dimensions Pin Assignments of D-Sub Analog Input Connector Mini D-Sub 15 Pin ConnectorPin No RGB Signal Analog YCbCr Signal Compatible Input Signal List Relationship between Screen Size and Projection distance Cable Connection Service Port Mini DIN-8PPC Control Codes and Cable Connection PC Control CodesOther Troubleshooting Check ListPower Video and AudioVideo equipment Installation environmentSignal cable ComputerCanon U. S. A., INC

LV-X6, LV-7250 specifications

The Canon LV-7250 and LV-X6 are advanced projector models renowned for their quality, versatility, and ease of use. Designed primarily for educational and corporate environments, these projectors combine high-performance features with user-friendly technology, making them ideal for presentations, lectures, and business meetings.

Starting with the Canon LV-7250, this model boasts a bright 2600 ANSI lumens lamp, ensuring clear and vivid images even in well-lit environments. Its native XGA resolution (1024 x 768) guarantees sharp text and detailed graphics, crucial for presentations and visual displays. The projector supports a variety of input options, including HDMI and standard VGA, making connectivity to various devices seamless. Additionally, the LV-7250 includes a 1.2x optical zoom and keystone correction features, allowing for flexible setup and easy alignment of images.

The Canon LV-X6, on the other hand, elevates the projection experience with its enhanced brightness of 3000 ANSI lumens and native SVGA resolution (800 x 600). This model is specifically designed for larger venues, where higher luminosity is essential. The LV-X6 features multiple connectivity options, including HDMI, USB, and composite video, accommodating different presentation formats and devices.

Both models incorporate advanced DLP technology, offering high contrast ratios that enhance the clarity and depth of projected images. They also ensure long-lasting performance with an extended lamp life of up to 6000 hours in Eco mode, reducing the need for frequent replacements and enhancing cost-effectiveness.

In terms of portability, both projectors are lightweight and compact, making them easy to transport between locations. They come equipped with built-in speakers, providing clear audio playback without the need for external sound systems, although connections for separate audio systems are available for enhanced sound quality.

The user-friendly interface and remote control availability further simplify operation, allowing users to navigate menus swiftly and access features easily. A robust cooling system ensures efficient thermal management, keeping the projectors operational for extended periods without overheating.

Overall, the Canon LV-7250 and LV-X6 models epitomize reliability, performance, and practicality, making them excellent choices for anyone seeking high-quality projection solutions in professional settings.
Top Page Image Contents