Canon manual Specifications, Optical, LV-7250 2000 lm, LV-X6 1500 lm, Electrical

Page 68

7. Appendix

Specifications

This section provides technical information about the projector's performance.

Model Number	LV-7250/LV-X6
Optical
LCD Panel	0.6" p-Si TFT active-matrix with Micro Lens Array (Aspect 4:3)
Resolution	1024 × 768 pixels* native, up to UXGA with scaling technology
Lens	Manual zoom and manual focus
	F1.6 - 2.5 f = 17.7 - 28.3 mm
Lamp	LV-7250:190W DC lamp (150W Quiet mode)
	LV-X6:150W DC lamp (120W Quiet mode)
Brightness	LV-7250: 2000 lm
	LV-X6: 1500 lm
Uniformity	85%
Image Size (Diagonal)	25" to 300"
Projection Distance	1.1 m to 8.8 m / 3.7' to 29.1'
Projection Angle	Tele: 8.3° - 8.6°/ Wide: 9.9° - 10.3°
Keystone Correction	+/- 30° Vertical (Auto keystone on LV-7250 only)
Electrical
Inputs	LV-7250:2 RGB/Component (D-Sub 15 Pin),
	1 S-Video (DIN 4 Pin), 1 Video (RCA), 1 (L/R) RCA Audio,
	1 Stereo Mini Audio, 1 Service Port (Mini DIN 8 Pin)
	LV-X6:1 RGB/Component (D-Sub 15 Pin),
	1 S-Video (DIN 4 Pin), 1 Video (RCA), 1 (L/R) RCA Audio,
	1 Service Port (Mini DIN 8 Pin)
Outputs	1 RGB (D-Sub 15 Pin), 1 Stereo Mini Audio (not available on LV-X6)
Video Compatibility	NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM,
	1125i (1080i), 750p (720p), 525p (480p), 525i (480i) / 60Hz
	1125i (1080i), 625p (576p), 625i (576i) / 50Hz
Scan Rate	Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
	Vertical: 50 Hz to 120 Hz
Video Bandwidth	RGB: 80 MHz (-3dB)
Color Reproduction	16.7 million colors simultaneously, Full color
Horizontal Resolution	NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60/YCbCr: 540 TV lines
	SECAM: 300 TV lines
	RGB: 1024 dots (H)×768 dots (V)
External Control	RS232, IR
Sync Compatibility	Separate Sync / Composite Sync / Sync on G
Built-in Speaker	1W (monaural)
Power Requirement	100 - 240V AC, 50 / 60 Hz
Input Current	LV-7250:3.1 - 1.3A
	LV-X6:2.4 - 1.0A
Power Consumption	LV-7250:8W in Standby mode /
	260W in Lamp Normal mode / 220W in Lamp Quiet mode
	LV-X6:8W in Standby mode /
	215W in Lamp Normal mode / 180W in Lamp Quiet mode

* Effective pixels are more than 99.99%.

59

Image 68

Contents LV-7250/LV-X6 Safety Cautions PrecautionsImportant Information Federal Communication Commission NoticeCanadian Radio Interference Regulations Réglementation canadienne sur les intérferences radioLamp Handling Precautions Important Safeguards InstallationFire and Shock Precautions Do Not Use in the Following EnvironmentsImportant Information Use Caution When Carrying or Transporting the Projector Remote Control PrecautionsTable of Contents Viii Whats in the Box? For LV-7250 onlyFeatures youll enjoy Introduction to the ProjectorIntroduction Congratulations on Your Purchase of The ProjectorIntroduction Rear Part Names of the ProjectorFront/Top Introduction Bottom To turn the logo upside down, follow the steps belowPush one end of the logo gently Release your hold and turn the logo upside downSelecting from Input List Introduction Top FeaturesDetecting the Signal Automatically Introduction Terminal Panel Features LV-7250 Part Names of the Remote Control / Button Not available on LV-X6 17. D. Zoom + ButtonFreeze Button Click Button Not available on LV-X6Introduction Battery Installation Operating Range for Wireless Remote ControlInstallation and Connections Setting Up the Screen and the Projector Installation and ConnectionsSelecting a Location Throw Distance and Screen SizeReflecting the Image Making Connections LV-7250 LV-X6Installation and Connections To connect Scart output RGB Video equipment such as DVD playerInstallation and Connections Connecting an External Monitor Audio Analog IN-1 Video Audio VID Press the Power button on the projector cabinet or Power button on the remote control for aboutTurning on the Projector Remove the lens capProjecting an Image Basic Operation To select a menu language, follow these stepsDetecting the Signal Automatically Selecting a SourceAdjusting the Picture Size and Position Adjust the Tilt FootRear foot height can be adjusted up to 10 mm/0.4 inch Lift the front edge of the projectorProjecting an Image Basic Operation Zoom FocusAdjusting with the Auto Keystone Function LV-7250 only Adjusting with buttons on the cabinetAdjusting with the Remote Control Correcting Keystone DistortionPress the Menu button. The menu will be closed Automatically Optimizing on RGB Image Turning Up or Down VolumeAdjusting the Image Using Auto PC adjustment Turning off the Projector To turn off the projectorAfter Use Preparation Make sure that the projector is turned offEnlarging and Moving a Picture Turning off the Image and SoundFreezing a Picture Using the Remote Mouse Receiver LV-7250 only Convenient FeaturesConnecting the remote mouse receiver to your computer When operating a computer via the remote mouse receiverAbout Drag Mode To enable the Password function Preventing the Unauthorized Use of the ProjectorTo turn on the projector when Password is enabled To disable the Password functionType in your password and press the OK button Using On-Screen Menu Using the MenusUsing On-Screen Menu For Adjusting items Slide barFor Selecting items Solid triangle For Selecting items Radio buttonIndicates the Key Lock is enabled Menu ElementsImage adjustment List of Menu ItemsReset Menu Descriptions & Functions Image adjustment Image modeDetail settings Selecting Reference Setting Reference Selecting Gamma Correction Mode GammaMenu Descriptions & Functions Display settings Using On-Screen Menu Adjusting White Balance White balanceReset Selecting Aspect Ratio AspectCopyright Menu Descriptions & Functions Setup Selecting Wall Color Correction Mode Screen colorGeneral LV-7250 Enabling Auto Keystone Auto keystone LV-7250 onlyUsing On-Screen Menu Selecting Lamp Mode Lamp mode Selecting Menu Language LanguageSelecting Communication Speed Communication speed Disabling the Cabinet Buttons Key lockSelecting a Color for Background No signal screen Setting Auto Adjust Auto PC adjustmentEnabling Direct Power on Direct power on Enabling Power Management Power managementUsing On-Screen Menu Enabling Fan Speed Mode Fan mode Enabling Key Sound and Error Sound BeepInput signal select Selecting Signal Format Enabling the deinterlace DeinterlaceUsage time Input signalMenu Descriptions & Functions Information Menu Descriptions & Functions Reset Using On-Screen Menu VersionResetting settings and adjustments Reset Clearing Lamp Hour Meter Lamp counterTo replace the filter sponge Cleaning or Replacing the FilterTo clean the air-filter Cleaning the Cabinet and the Lens MaintenanceReplacing the Lamp To replace the lampRemove the lamp cover Remove the lampInsert a new lamp until the lamp is plugged into the socket Troubleshooting Indicator MessagesProblem Check These Items AppendixPower on process for the projector and the PC Specifications OpticalLV-7250 2000 lm LV-X6 1500 lmAppendix Mechanical For EuropeCabinet Dimensions Pin No RGB Signal Analog YCbCr Signal Pin Assignments of D-Sub Analog Input ConnectorMini D-Sub 15 Pin Connector Compatible Input Signal List Relationship between Screen Size and Projection distance Service Port Mini DIN-8P PC Control Codes and Cable ConnectionPC Control Codes Cable ConnectionTroubleshooting Check List PowerVideo and Audio OtherInstallation environment Signal cableComputer Video equipmentCanon U. S. A., INC