Computer Input
Input Source Selection (RGB(PC digital), RGB(AV HDCP))
Direct Operation
Choose Computer 1(Digital) by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described below.
Top Control
| POWER | WARNING |
ON | MENU | INPUT |
- |
|
|
OFF |
|
|
| SELECT |
|
INPUT button
Computer 1 (Analog)
Computer 1 (Digital)
Computer 2
Video
Wired
Menu Operation
1 | Press the MENU button to display the |
| Menu. Use the Point 78 buttons to move the red |
| frame pointer to the Input Menu icon. |
2 | Use the Point ed buttons to move the red arrow |
| pointer to Computer 1 (Digital), and then press the |
| SELECT button. |
3 | After the Source Select Menu appeared for Computer |
| 1 (Digital), move the pointer to RGB (PC digital) or RGB |
(AV HDCP), and then press the SELECT button.
✔Notes:
•Computer 2 is not displayed when the COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal is set as Monitor out. (p.49)
•Computer 2 can accept only RGB signal.
•HDCP
•Wired, Wireless, Memory viewer are for the Network function. See owner’s manual “Network
•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.49).
Remote Control
COMPUTER button
Computer 1 (Analog)
Computer 1 (Digital)
Computer 2
Input Menu icon
Input Menu
Move the pointer (red arrow) to Computer 1 (Digital) and press the SELECT button.
Computer
1
Move the pointer to the source that you want to select and press the SELECT button.
29