Computer Input
Display area H
Use the Point 78 buttons to adjust the horizontal area displayed by this projector.
Display area V
Use the Point 78 buttons to adjust the vertical area displayed by this projector.
Reset
To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures.
Mode free
To clear the stored data, select Mode free and then press the SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press the SELECT button.
Store
To store the adjusted data, select Store and then press the SELECT button. Move the red arrow pointer to one of the Modes 1 to 5 in which you want to store, and then press the SELECT button.
Quit
Exit the PC Adjust Menu.
✔Notes:
•Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i, or 1080i is selected in the PC System Menu (p.30).
•PC Adjust Menu cannot be selected when Computer 1(Digital) is selected in the Input Menu (p.29).
Move the red frame pointer 
to the desired item and
press the SELECT button.
This Mode has stored
To clear adjusted data parameters.
Vacant | Values of “Total dots”, |
| |
| “Horizontal”, “Vertical”, |
| “Display area H”, and |
| “Display area V”. |
To store adjusted data
Close this dialog box.
33