Eiki LC-XB29N owner manual Basic Operation Turning Off the Projector

Basic Operation

Turning Off the Projector

1	Press the POWER ON-OFF button on the top control or
	on the remote control, and “Power off?” appears on the
	screen.
2	Press the POWER ON-OFF button again to turn off the
	projector. The POWER indicator starts to blink red, and
	the cooling fans keep running. (You can select the level
	of fans’ quietness and speed. See “Fan” on page 54.)
		“Power off?” disappears after 4 seconds.
	At this time, you can unplug the AC power cord even if
	the fans are still running.
3	When the projector has cooled down enough, the
	POWER indicator stops blinking and you can turn on

the projector. After it is cooled down completely, unplug the AC power cord.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE

YOU TURN THE PROJECTOR ON, WAIT AT

LEAST FIVE MINUTES BEFORE TURNING IT OFF.

✔Notes:

•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.51).

•Do not operate the projector continuously without rest. Continuous use may result in shortening the lamp life. Turn off the projector and let stand for about an hour in every 24 hours.

•The running speed of cooling fans is changed according to the temperature inside the projector.

•Do not put the projector in a case before the projector is cooled enough.

•If the WARNING indicator blinks or lights red, see “Warning Indicators” on page 56.

•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

22