Eiki LC-XB29N owner manual Video Input, Input Source Selection Video, S-video, Auto, Input Menu

Video Input

Input Source Selection (Video, S-video)

Direct Operation

Choose Video by pressing the INPUT button on the top control or the VIDEO button on the remote control.

Before using these buttons, correct input source should be selected through menu operation as described below.

Menu Operation

Top Control

	POWER	WARNING
ON	MENU	INPUT
-
OFF
	SELECT

Remote Control

INPUT button

INPUT button

Computer 1 (Analog)

Computer 1 (Digital)

Computer 2

Video

Wired

VIDEO button

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 78 buttons to move the red
	frame pointer to the Input Menu icon.
2	Use the Point ed buttons to move the red arrow
	pointer to Video and then press the SELECT button to
	display the Source Select Menu.
3	Move the pointer to the desired source and then press
	the SELECT button.
		When selecting Auto, the projector automatically
	Auto
		detects incoming video signal, and adjusts itself
		to optimize its performance. The projector selects
		connection in the following order:
		1. S-video
		2. Video
		When video input signal is connected to the
Video
		VIDEO jack, select Video.
		When video input signal is connected to the S-
S-video
		VIDEO jack, select S-video.

✔Notes:

•Computer 2 is not displayed when the COMPUTER IN 2 / COMPONENT IN / MONITOR OUT terminal is set as Monitor out. (p.49)

•Wired, Wireless, and Memory viewer are for the Network function. See the owner’s manual “Network Set-up and Operation” and owner’s manual of Memory viewer (optionally available).

•When the Input Search function is set to “On1” or “On2”, the input signal will be searched automatically (p.49).

Input Menu icon

Input Menu

Move the pointer to

Video and press the

SELECT button.

VIDEO

Source Select Menu (VIDEO)

Move the pointer to the source that you want to select and press the SELECT button.

38