OPERATIONS
INITIAL AUTO PRESET
This section describes the initial settings when you first turn on the power after purchase. The initial setting items are shown below.
NOTE:
Be sure that antenna or cable is connected properly before plugging the power cord.
• D.S.T. (Daylight Saving Time)
You can set the air time display for digital broad- casting. When you set this function to ON, the date information adjusted for the area set by TIME ZONE will be adjusted to the one added by anoth- er 1 hour. In addition, the time difference will be adjusted as follows: 2 a.m. on first Sunday in April to 3 a.m., 1 hour ahead, and 2 a.m. on last Sunday in October to 1 a.m., 1 hour behind.
•TIME ZONE
The EPG information in digital broadcasting is adjusted based on the area set in TIME ZONE.
•AUTO PRESET CH (DTV/TV) (When using antenna)
The channels broadcasted in DTV and TV are automatically scanned and memorized. Only the receivable channels in the area where this TV is used will be memorized.
•AUTO PRESET CH (CATV) (When using basic cable)
The channels broadcasted in CATV are automati- cally scanned and memorized.
1 | 2 | 3 | |
4 | 5 | 6 | |
7 | 8 | 9 | |
| CHANNEL | ||
| RETURN | ||
CH K / L | 0 | +100 | |
| CH | ||
|
| ||
| VOL | VOL | |
|
| CH | |
|
| VOL X / Y | |
MENU | INPUT | SLEEP MUTE | |
SELECT | |||
|
|
1Set the D.S.T. (Daylight Saving Time)
When you first turn on the power, the following screen is displayed.
1.PLEASE CONNECT ANTENNA TO THE UNIT.
2.SET UP THE ITEMS WITH
,AND BUTTONS.
D.S.T. (Daylight Saving) | [- - |
TIME ZONE | [- - |
AUTO PRESET CH(DTV/TV) |
|
AUTO PRESET CH(CATV) |
|
•Using [VOL X/Y] on the remote control, set "D.S.T. (Daylight Saving)" to [ON] or [OFF].
1.PLEASE CONNECT ANTENNA TO THE UNIT.
2.SET UP THE ITEMS WITH
,AND BUTTONS.
D.S.T. (Daylight Saving) | [ON] |
TIME ZONE | [- - |
AUTO PRESET CH(DTV/TV) |
|
AUTO PRESET CH(CATV) |
|
2Using [CH K/L] on the remote control, select "TIME ZONE".
1.PLEASE CONNECT ANTENNA TO THE UNIT.
2.SET UP THE ITEMS WITH
,AND BUTTONS.
D.S.T. (Daylight Saving) | [ON] |
TIME ZONE | [- - |
AUTO PRESET CH(DTV/TV) |
|
AUTO PRESET CH(CATV) |
|
•Every time you press [VOL X/Y] on the remote control, the area will be switched as below.
• Set your area.
NOTE:
You must set “D.S.T.” and “TIME ZONE” before presetting channels.
FUNCTIONS / OPERATIONS
13
EN