PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the
1)Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord.
2)Press the POWER button to turn on the TV.
3)Press the MENU button so that the menu display appears on the TV screen.
4)Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".
5)Select "ENGLISH" or "FRANÇAIS" = French by using the VOL(ume) ▲ or ▼ button.
6)Press the MENU button to exit the menu.
PICTURE CHANNEL SET [ENGLISH]FRANÇAIS
PICTURE CHANNEL SET 
[ENGLISH]FRANÇAIS
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.
3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4) Use the CH(annel) ▲ or ▼ button to select the channel you wish to put into memory or to erase from memory.
Note: The display will return to a normal screen in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen.
● Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.
●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT RED if you wish to erase the channel from memory.
CHANNEL PRESETTING
NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button. To preset a channel or to change a preset channel, follow the procedure below.
1)Press the POWER button to turn on the TV.
2)Press the MENU button so that the menu display appears on the TV screen.
3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.
4)Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO". Then, press the VOL(ume) ▲ button.
The tuner scans and memorizes all active channels in your area.
●The TV distinguishes between standard TV channels and cable (CATV)
channels.
● When AUTO MEMO action is completed, the lowest memorized channel |
5) Press the MENU button to exit the menu.
MTS (Multi-Channel Television Sound) System
You can listen to a program in MTS stereo by following the steps below.
Type of broadcast | MENU | Display on |
|
|
|
|
|
|
|
| |||
| SELECTION | the TV screen |
|
|
| |
|
| To show the status, press the DISPLAY | ||||
Regular |
| |||||
| button on the remote control. | |||||
(monaural audio) |
|
|
|
| ||
|
|
|
|
|
| |
Stereo broadcast | STEREO [ON] | STEREO |
| SAP: Second Audio Program, which | ||
| STEREO [OFF] | MONO |
| means your program, can also be | ||
SAP | MAIN/SAP [MAIN] | MAIN |
| received in a second language or | ||
| MAIN/SAP [SAP] | SAP |
| sometimes a radio station. | ||
|
|
|
|
|
|
|
[To Select STEREO or MONO in Stereo broadcast] [To Select MAIN or SAP in Bilingual broadcast]
reappears on the screen. |
● When you press the CH(annel) ▲ or ▼ button after selecting AUTO |
MEMO, |
the tuner will stop at the memorized channels only. |
● The TV may detect TV channels as CATV channels if the receiving conditions |
case, try AUTO MEMO action again when receiving conditions are better. |
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲ button.
3) Press the CH(annel) ▲ or ▼ button so that "STEREO" is selected.
4) Press the VOL(ume) ▲ or ▼ button to select the stereo mode on or off. Stereo sound is effective when the "STEREO" is on.
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲ button.
3)Press the CH(annel) ▲ or ▼ button so that "MAIN/SAP" is selected.
4) Press the VOL(ume) ▲ or ▼ button to select the "MAIN” or “SAP". Bilingual sound is effective when the "SAP" is selected.
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.
OPERATIONS
WATCHING A TV PROGRAM
1)Press the POWER button to turn on the TV.
2)Select the desired channel with the CH(annel) ▲ or ▼ button.
3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
PICTURE ADJUSTMENT
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.
GAME MODE | Notes: |
SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.
1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .
2)You may change the sleep time by pressing the SLEEP
button on the remote control repeatedly. The timer can be set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will
be displayed on the screen when you press the SLEEP button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.
Set to the most suitable position for TV GAME.
[+]: ON
BRIGHT
Adjust until the whitest parts of the picture are as bright as you prefer.
[+]: increase brightness
CONTRAST
Adjust to increase or decrease contrast.
[+]: increase contrast
COLOR
●In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) ▲ button so that "PIC- TURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeatedly until the display returns to the screen.
●If you adjust the other Picture control after
you set the Game mode to [ON], the Game mode is set to [OFF] automatically.
[USING THE GAME BUTTON]
You may also set the Game mode and external input mode at the same time by pressing the
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro- grams, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
: Press the VOL(ume) ▲ or ▼ button.
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲ or ▼ button to point to "CAPTION".
3)Press the VOL(ume) ▲ or ▼ button to select the mode you wish.
4)When done, press the MENU button to exit the menu.
Adjust to be brilliant or pale color.
[+]: be brilliant color
TINT
Adjust to obtain natural skin tones.
[+]: greenish tone
GAME button on the remote control. "GAME" appears on the TV screen. In this case, connect the external source to the AUDIO/VIDEO jacks on the front panel.
● | To exit the Game mode and external input |
| mode, press the INPUT SELECT button on |
| the remote control. |
● To cancel the Game mode only, adjust the pic- | |
| ture control. In this case, "VIDEO2" instead |
| of "GAME" appears on the TV screen. |
● | If you press the GAME button when the TV |
| is off, the TV turns on and will be in the |
PICTURE | PICTURE | PICTURE | PICTURE | PICTURE |
CHANNEL SET | CHANNEL SET | CHANNEL SET | CHANNEL SET | CHANNEL SET |
[ENGLISH]FRANÇAIS | [ENGLISH]FRANÇAIS | [ENGLISH]FRANÇAIS | [ENGLISH]FRANÇAIS | [ENGLISH]FRANÇAIS |
CAPTION [OFF] | CAPTION [ C1] | CAPTION [ C2] | CAPTION [ T1] | CAPTION [ T2] |
Game mode and external input mode auto- |
matically. |
: Press the CH(annel) ▲ or ▼ button.
GAME MODE [+] | BRIGHT | [+] | COLOR | [+] | TINT | [+] | ||||||||||
OFF | ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|