Weber 3200 NG, 3400 NG, 2200 NG manual Install Work Surfaces, Install Work Surface and Side Burner

Page 8

INSTALL WORK

SURFACES

FOR THE PLATINUM SERIES II 2200

You will need...left work surface, right work surface, four 1/4-20 x 1/2 inch bolts, four nylon washers and a 7/16 inch or adjustable wrench.

Insert the left work surface tabs in the slots to the left of the cooking box. Figure 10 (a). Slip washers on the bolts and insert the bolts as shown. Tighten. Figure 10 (b).

Insert the right work surface tabs in the slots to the right of the cooking box. Figure 10 (c). Slip washers on the bolts and insert the bolts as shown. Tighten.

Figure 10 (d).

(a)

Tabs(c)

INSTALL WORK SURFACE AND SIDE BURNER

FOR THE PLATINUM SERIES II 3200

You will need... left work surface, side burner assembly, four 1/4-20 x 1/2 inch bolts, four nylon washers and a 7/16 inch or adjustable wrench.

Insert the left work surface tabs in the slots to the left of the cooking box. Figure 11 (a). Slip washers on the bolts and insert the bolts as shown. Tighten. Figure 11 (b).

Note: Remove protective covers from tabs of side burner.

Insert the side burner assembly tabs in the slots to the right of the cooking box. Figure 11 (c). Slip washers on the bolts and insert the bolts as shown. Tighten.

Figure 11 (d).

Side burner can only be installed on right side of barbecue.

(a)

Tabs

(c)

 

 

 

View from left side

(b)

View from right side

(d)

View from

left side

View from right side

(b)

(d)

View from left underside

View from right underside

Platinum Series II 2200

Figure 10

After this assembly, proceed to step “Install Bottom Rack” on page 12.

View from left underside

Platinum Series II 3200

Figure 11

View from right underside

8

Image 8
Contents Platinum Series Install GAS Supply General Specifications for PipingSupplies Needed Tools NeededRemove Bottom Tray from Grill Remove Grill from Lower Packaging Remove Packaged Parts from Lower CartonInstallation of Catch PAN Into Bottom Tray Reinstallation of Stainless Steel Flavorizer BarsReinstallation of Cooking Grates Reinstallation of Warming RackInstall WARM-UP Basket Install Work Surfaces Install Work Surface and Side BurnerIgniter electrode To install side burner Burner Base Orifice Install Bottom Rack Check That ALL Burner Valves are OFFCheck for GAS Leaks View from below Reinstall Control Panel Refer to Operating Guide Before Lighting Barbecue
Related manuals
Manual 24 pages 28.39 Kb