VTech VT181CH-IR, VT181CHE-IR manual Cleaning and Maintanence

Page 14

Section

6

CLEANING AND MAINTANENCE

 

Cleaning

Occasionally clean the display panel and cabinet with a soft cloth dampened (not soaked) with a mild (non-abrasive) glass cleaner. Keep turning a fresh side of the cloth toward the screen surface to avoid scratching it with accumulated grit.

Note:

The solvent should be applied only to the cloth, and not directly on the monitor screen.

Do not use paper products as they may scratch the surface. To minimize the risk of abrasion, allow the screen to stand dry.

Special care should be taken when cleaning a touch screen or polycarbonate shield that is installed over the screen. Abrasive and certain chemical cleaners can easily damage the surface.

Never use alcoholic or ammoniac cleaners to clean the polycarbonate shield or a touch screen.

Note:

For best results cleaning a monitor with the optional antireflective tempered glass display shield, a solution of denatured alcohol is recommended to thoroughly clean the display.

Other Maintenance

Qualified service personnel should perform all maintenance, except for the power cord replacement described above.

12

Image 14
Contents VarTech Systems Inc Table Of Contents VT181CH Display Family IntroductionProduct Safety Precautions Display Setup VT181CH Series Display FeaturesSignal Connections Unpacking and setting up your displayHD15 Connector Pin SignalButton Description Adjusting the displayGetting Started User Controls Color Menu Adjustment ProcedureGeometry Menu Miscellaneous Menu Touch Screen Touch Screen IntroductionTroubleshooting Troubleshooting TipsCleaning and Maintanence CleaningMounting Instructions Mounting Procedure Tray MountMounting Procedure Flush Mount Specifications Engineering SpecificationsVartech Systems