Selecting the recording speed SP or LP

STANDBY/ON y

K B L C

2.Press

4.Now start recording as usual by pressing RECORD/OTR I on the remote control.

5.Stop recording with L C .

Selecting the recording speed (SP or LP)

LP allows to double the recording duration on tape (for example six hours instead of three hours on an E180 cassette).

1.Switch on the TV set. If required, select the programme number for the video recorder.

MENU . The main menu will appear.

3.Select 'RECORD SETUP' using							K B	L C
3.Select 'RECORD SETUP' using
and confirm with					.
and confirm with				B 1	.
4.									.
Select 'RECORD SPEED' using							K B	L C
5.Select the required recording speed with
		.
	B 1	.

			SELECT K L CHOOSE B
			→RECORD SPEED			[SP]
			DIRECT RECORD			[OFF]
			RECORD LINK			[OFF]
			END=EXIT

6.To end, press STATUS/EXIT .

SP'/'LP' /'AUTO'

'SP': StandardPlay (normal recording speed) offers the usual first-class picture quality.

'LP': LongPlay (half recording speed, double recording time). 6 hours can be recorded on a 3- hour cassette (E180) with a somewhat reduced picture quality.

'AUTO': AUTOmatic Long Play. If there is not enough space on the tape to record a pro- grammed recording in standard speed, the record- ing is automatically done in 'LP'

(Longplay). Otherwise, the recording speed will be 'SP' (Standardplay).

Automatic controlled recording from a satellite receiver (RECORD LINK)

This function automatically starts recording on the switched-off video recorder when a video signal is recognised through the connected scart cable. If your satellite receiver has a programming function, the recording will start automatically (as long as the satellite receiver is switched on).

1.Use a scart cable to connect scart socket AV2(DECODER) on the video recorder to the corresponding scart socket on the satellite receiver.

2.Switch on the TV. If required, select the pro- gramme number for the video recorder.

3.Press MENU . The main menu will appear. 4.Select 'RECORD SET UP' with

and confirm with B 1 .

5.Select 'RECORD LINK' with K B L C .


6.Select function 'ON' with			B 1		.
7.To end, press				.
		STATUS/EXIT


	SELECT K L CHOOSE B
	RECORD SPEED		[SP]
	DIRECT RECORD		[OFF]
	→RECORD LINK		[OFF]

END=EXIT

8.Insert a cassette.

9.Programme the satellite receiver with the required information (programme number of the TV channel, start time, end time).

If necessary, please see the operating instructions for your satellite receiver.

10.Switch off the video recorder with

The video recorder is now ready to record. The beginning and end of the recording is controlled via scart socket AV2(DECODER).

18	EN