'Direct Record'
With Direct Record, you can record the right TV channel in seconds even if your video recorder is switched off. If the recording is started manually, the video recorder uses the current TV channel set on the TV. You will find more information on how to switch 'Direct Record' on or off in the next section. Make sure that your video recorder socket (AV1/TV) and the TV are connected by a scart cable.
1.On the TV, select the programme number you want make the recording from.
2.Press RECORD/OTR I with the video recorder
switched off.
3.Stop recording with
L C
.
How does Direct Record work?
The video recorder compares the TV channel selected on the TV set with its stored TV channels via the scart cable. If the same TV channel is found, it switches the video recorder to the corre- sponding programme number and starts recording. Please do not change the TV channel on the TV set during the search so as not to affect the process.
Switching 'Direct Record' on or off
1.Switch on the TV. If required, select the pro- gramme number for the video recorder.
2.Press MENU . The main menu will appear.
3.Select 'RECORD SET UP' with
and confirm with B 1 .
4.In 'DIRECT RECORD', select 'OFF' (Direct Record off) or 'ON' (Direct Record on) with
B 1
5.To end, press
STATUS/EXIT
.
SELECT K L CHOOSE B
RECORD SPEED | [SP] |
→DIRECT RECORD | [OFF] |
RECORD LINK | [OFF] |
END=EXIT |
|
6.Switch off with
STANDBY/ON y .
19 | EN |
|