Polycom VR630/07 manual Setting the RF out channel, What is RF out channel?

7.Press

2.Press

Setting the RF out channel

In some reception locations it is possible that a TV channel will be sent on the same or similar frequency as the video recorder.

Result: As soon as the video recorder is switched on, the reception quality for this or sev- eral other TV channels will decrease.

The following steps will show you how to change the pre-set 'transmission' (RF out channel) fre- quency on the video recorder.

What is RF out channel?

This electronic component in the video recorder allows the device to transmit audio and video signals via the aerial cable. These signals can be received on a TV set just like TV channels. This frequency or channel indicates the channel on which the audio or video signal is transmit- ted.

1.Switch on the TV. If required, select the pro- gramme number for the video recorder.

MENU . The main menu will appear.

3.Select 'INITIAL SET UP' with K B L C and

confirm with

B 1

.

4.Select 'RF OUT' with

and confirm

K B

L C

with

.

B 1

SELECT K L CHOOSE B

→RF OUT CH

35

END=EXIT

5.Press

.

B 1

6.Press

or

to select the channel

K B

L C

0..9

which is not broadcasted between channel 22 and channled 69 in your area.

B 1 . When you want to receive TV signals directly from the VHF/UHF TV aerial, select the channel 22 first. Then, press L C

and confirm with B 1 .

8.To end, press STATUS/EXIT .

12 EN