Setup Menu
Stop the program playback
0During playback of the programmed tracks, press STOP key.Then after you press PLAY key, the DVD Player will resume normal playback.
Repeat the program playback
0During playback of the programmed tracks, press the REPEAT key.The programmed tracks can be played again.
Display Dim
This function is used to adjust the brightness of display on the front panel of the DVD Player.
1Press the 34 keys to highlight DISC LOCK in the GENERAL SETUP menu.
2Enter its submenu by pressing the 2 key.
➜LOCK: Lock the disc being played.
➜UNLOCK: unlock the disc.
3Press the 1 key to return to the GENERAL SETUP menu.
Notes:
–When a locked disc is loading, the DVD Player will prompt you to enter your password (842100 is the default password).
–To change the password , refer to the option PASSWORD in the PREFERENCE SETUP menu .
1Press the 34 keys to highlight DISPLAY DIM in the GENERAL SETUP menu.
2Enter its submenu by pressing the 2 key.
➜ Press the 34 keys to highlight 100%/70%/ 40% item.
3Press OK to confirm.
4Press the 1 key to return to the GENERAL SETUP menu.
Disc Lock
When the disc is locked, the player will store its specific code into the memory for future identification. For the next playback, the DVD Player will prompt you to enter the password. Then, press OK to load the disc.
Screen Saver
This function is used to turn the screen saver on or off.
1Press the 34 keys to highlight SCREEN SAVER in the GENERAL SETUP menu.
2Enter its submenu by pressing the 2 key.
3Move the cursor by pressing the 34 keys to highlight the selected item.
➜ON: In STOP or No DISC mode, if no actions are performed within 5~6 minutes, the screen saver will be activated.
➜OFF: Screen saver is disabled.
4Press OK to confirm.
5Press the 1 key to return to the GENERAL SETUP menu.
18
18 | 3139 246 12911 | |
18/03/2003, 5:41 PM |