Maintenance
Cleaning the Cabinet
¶Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
¶ When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion.
¶Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center.
Problem | Solution |
|
|
No power | – Check if the AC power cord is properly connected. |
No picture | – Check if the TV is switched on. |
| – Check the video connection. |
|
|
Distorted picture | – The disc is badly scratched or dirty. |
| – Sometimes a small amount of picture distortion |
| may appear .This is not a malfunction. |
Completely distorted picture or black/white picture with DVD or Video CD
–Make sure the NTSC/PAL setting at the DVD Player matches the video signal of your television. (See NTSC/PAL CONVERSION)
–If the picture becomes distorted after switching between PAL and NTSC, please set the SMART PICTURE to STANDARD.
No sound or distorted sound | – | Adjust the volume. |
| – | Check that the speakers are connected correctly. |
|
| 27 |
27 | 3139 246 12911 | |
18/03/2003, 5:41 PM |