Setup Menu
Reverb Mode
The REVERB MODE can stimulate the echo and frequency response of some particular places to make you feel like personally on the place.
1Press the 34 keys to highlight the REVERB MODE.
2Enter its submenu by pressing the 2 key.
3Move the cursor by pressing the 34 keys to highlight the selected item.
➜ OFF: Playback a disc in original sound effect.
4Press OK.
5Press the 1 key to return to the DIGITAL OUTPUT SETUP menu.
Digital Audio Setup menu
In this menu, you can set up the digital audio output signal from the digital terminals, such as coaxial or optical etc.
1Press SYSTEM MENU to enter the SETUP menu.
2Press the 34 keys to choose the DIGITAL OUTPUT SETUP.
3Press OK.
Digital Output
1Press the 34 keys to highlight DIGITAL OUTPUT.
2Enter its submenu by pressing the 2 key.
3Press the 34 keys to highlight the selected item.
➜ALL: Original digital signals output.
➜PCM ONLY: If your receiver is PCM- compatible, or your receiver can not decode
4Press OK.
5Press the 1 key and return to the DIGITAL OUTPUT SETUP menu.
Note:
–If DIGITAL OUTPUT is set to ALL, all audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust
LPCM OUTPUT.
Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.
1Press the 34 keys to highlight the LPCM OUTPUT.
2Enter its submenu by pressing the 2 key.
3Move the cursor by pressing the 34 keys to highlight the selected item.
➜48K: Playback a disc recorded at the sampling rate of 48kHz.
➜96K: Playback a disc recorded at the sampling rate of 96kHz.
4Press OK.
5Press the 1 key to return to the DIGITAL OUTPUT SETUP menu.
20
20 | 3139 246 12911 | |
18/03/2003, 5:41 PM |