Install the remote control batteries | Polycom 52PFL7403D manual

ESPAÑOL FRANÇAISE ENGLISH

Step 3 Connect cables

Connect the antenna or cable, the power cord and all other devices to the back of the TV as described in the following sections and in Connect your devices on page 32.

Step 4 Secure the VESA-compliant wall bracket to the TV

BBWARNING: Only use the specified bolts (M6 for 32 inch models, M8 for all other models) to secure the VESA-compliant wall bracket to your TV. The specified bolts are designed to match the weight of your TV.

DDNote: Depending on your VESA-compliant wall bracket, you may need to separate the mounting plate from the wall bracket for easier installation. Refer to your VESA-compliant wall bracket documentation for instructions.

3.3Install the remote control batteries

1.Open the battery cover on the back of the remote control.

2.Insert the 2 batteries supplied. Make sure the + and - ends of the batteries line up correctly (inside of case is marked).

3.Close the cover.

DDNote: If you are not going to use the remote control for a long time, remove the batteries.

3.4Connect the antenna or cable

This section describes how to connect your TV to an antenna, cable, Direct Broadcast Satellite, and to a set-top box.

Cable

Connect to an antenna

Any DTV programs that are broadcast in your area can be received for free through an antenna connection.

Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area.

Broadcasters are transitioning from analog to digital TV. This means that a given broadcaster can have channels available either in analog or in digital, or both analog and digital at the same time.

The TV has stereo sound if the broadcasting channel makes it available.

Connect to a cable

When your TV is connected to the cable socket, you may receive free digital and high definition programming (depending on your cable provider). Digital and high definition cable channels can be recognized by the format of the channel number.The channel number includes a dot "." For example, 11.1, 46.30, 108.201. Contact your cable provider for more information.

Connect to a Direct Broadcast Satellite (DBS)

There are two main DBS systems: DirecTV and DishNetwork. These systems require a separate, proprietary set-top box to decode signals and send them to the TV. The set-top box contains a digital TV tuner for receiving off-air digital television broadcasts.

Contact your local DBS provider for more information about the connections and the TV channels.

Connect to a set-top box

A cable box or satellite set-top box can be connected to the TV through the following connections:

•ANT

•A/V (Composite Video and Audio)

•S-Video

•YPbPr (Component Video Input)

•HDMI

For information about how to connect a set-top box, see the Quick Start Guide provided.

EN-8