Connect a set-top box through RF IN/OUT
If the TV is connected to a cable box or satellite
Connect a
HDMI
R | R | R | SERV. U |
L | L | L |
|
3.5Connect the power cord
BBWARNING: Verify that your voltage corresponds with the | ENGLISH |
| |
voltage printed at the back of the TV. Do not insert the power |
|
cord if the voltage is different. |
|
To connect the power cord |
|
1.Locate the power connector at the back of the TV.
The location of the power connector varies according to TV model.
| FRANÇAISE |
2. Insert the power cord fully into the TV power connector. | ESPAÑOL |
|
3.Connect the power cord plug to the power outlet. Ensuring that the cord is tightly secured at both ends.
To disconnect the TV from the power outlet
The TV set is always connected to the power.You can disconnect the TV from the power by doing one of the following tasks:
Pr Pr
SPDIF OUT
| Pb | Pb | VIDEO | L |
|
|
|
| |
| Y | Y |
| R |
| AV 1 | AV 2 | AV 3 | DVI AUDIO |
| IN | |||
HDMI 1 | HDMI 2 |
|
| HDMI 3 |
•Unplug the power cord located at the back of the TV.
•Unplug the power cord from the power socket outlet.
Pull the power cord by the plug - do not pull on the power cord.
3.6Manage cables
Route your power cord, antenna cable and all other device cables through the cable holder at the back of the TV. This holder helps keep your cables tidy and easily manageable.