Get started, Position the TV | Polycom 52PFL7403D guide

3.Get started

This section describes how to position and connect your TV, and how to perform your first-time installation.

3.1Position the TV

BBWarning

•Do not insert the power plug into the wall socket before all the connections are made.

•Large screen TVs are heavy. Two people are required to carry and handle the TV.

•Before you move your TV, disconnect the cables to prevent breakage.

Wherever you decide to position your TV, ensure that you always have easy access to the power cord or plug to disconnect the TV from the power.

If the TV is mounted on a swivel base or swivel arm, ensure no strain is placed on the power cord when the TV is swivelled. Strain on the power cord can loosen connections.

For ideal viewing conditions, position the TV where light does not fall directly on the screen.

The ideal viewing distance for watching TV is three times its screen size.

Kensington security slot

Your TV is equipped with a Kensington Security Slot at the back of the TV.

If you connect an anti-theft Kensington lock (not supplied), position the TV within reach of a permanent object that can be attached to the lock.

TV screen size	VESA-	Bolt and	Special
(inches)	compatible	spacer type	instructions
	wall bracket	(not supplied)
	(millimeters)	(not supplied)
	(millimeters)
32	Adjustable	4 of M6x10mm	Adjust bracket to
	300 x 300	steel bolt	200 x 300 before
		or	securing to the
		or	TV.
		4 of M6x50mm	TV.
		4 of M6x50mm
		steel bolt with
		40mm spacer
42 or larger	Fixed 400 x 400	4 of M8x15mm	None
		steel bolt
		or
		4 of M8x55mm
		steel bolt with
		40mm spacer

DDNote: You can purchase a VESA-compatible wall bracket from www.shopping.philips.com/wallmounts.

Step 2 Remove the TV stand

DDNote: Stand may differ according to TV model. These instructions are only applicable to TV models with mounted stands. If your TV stand is not mounted, skip to Step 3 Connect cables.

1.Carefully place the TV face down on a flat, stable surface that is covered by soft cloth. The cloth should be thick enough to protect your screen.

2.Using a cross-head (Phillips) screwdriver (not supplied), unscrew the four screws that secure the stand to the TV.

ESPAÑOL FRANÇAISE ENGLISH

3.2Wall mount the TV

BBWARNING:Wall mounting of the TV should only be per- formed by qualified installers. Koninklijke Philips Electronics N.V. bears no responsibility for improper mounting that results in accident or injury.

Step 1 Purchase a VESA-compatible wall bracket

Depending on the size of your TV screen, purchase a wall bracket, bolts and, optionally, spacers.

3.Firmly pull the stand from the bottom of the TV, being careful because the stand is heavy. Place both the stand and screws in a secure location for future reinstallation.

EN-7