TechniSat TechniBox VIACAM instruction manual Adding items to the User Channel List

Page 31

>Use the up/down arrow keys to mark the entry Select.

>Confirm with the OK key.

The sub-menu >Programmes>Select will be displayed.

This table lists the various bouquets with their respective channels. Existing channels will be shown in black type, newly found channels will be displayed in red type. Channels that also appear in the User List are marked with a red cross. Scrambled channels are marked with a key symbol. Bouquets are displayed with a blue background.

7.1.1 Adding items to the User Channel List

>Use the up/down arrow keys to mark a channel or bouquet that you wish to work on.

>Press the OK key, and this field will display a red cross (inclusion in user list). If a single channel is added, the menu background will turn transparent, and the video image of that channel displayed in the background.

7.1.2 Deleting items from the User List

If the red cross is removed, the marked channel will be deleted from the User List. However, it will be retained in the Total List, and can be reinstated in the User List at any time.

7.1.3 Deleting items from the Total List

The marked channel can be deleted from the total List by pressing the red function key. As long as you have not left this menu again, the channel can again be included by again pressing the red function key.

If you have marked a bouquet, the setting will affect the whole bouquet, whereas only a spe- cific channel will be affected if you mark the channel.

31

Image 31
Contents Viacam Arrow right Arrow down Remote controlContents Page Viaccess Important hints on Usage Please read this firstEquipment not in use Safety AdvicePage Connection to a Television set External InstallationConnections Mains connectionSetting the UHF Output Channel Analogue Video Cassette Recorders VCRSuper VHS Video Cassette Recorders AmplifierOSD Language InstallationSerial Interface RS USB InterfaceParental lock Basic SettingsTime difference GMT hours Country Audio/Video SettingsAdjustments for the External Unit Adjusting the Switching Matrix and LNB Properties Switching DiSEqC on or offLOF high band Additional SettingsSwitchover LOF low/high LOF low bandIncreasing LNB voltage Operation Switching on and offProgramme Selection Information Info Box Using the Programme ListReception of scrambled encrypted Programmes Selecting blocked programmesDolby Digital AC3 mode Adjusting sound volumeSelecting a different language Additional Programme Information TV/Radio selectionReturn to previous programme selected Displaying Time and Programme InformationEntering EPG data Sub-titlesElectronic Programme Guide EPG functions allow you toViewing the Electronic Programme Guide Now Display of current programme contentsNext Display of immediately following programmes EPG Functions PreviewEPG Information EPG Summary Activate VCR Timer modeDisabling the timer function Preselect ProgrammeDisplaying EPG Summary of other Channels EPG SearchPage Stop Programming the Timer Date StartProgramme Switching Timer on RepeatStatus SourceAdding/Deleting Channels Changing the Basic ProgrammingDeleting items from the User List Adding items to the User Channel ListDeleting items from the Total List Blocking Channels Sorting ChannelsProgramming the Electronic Programme Guide Changing the PINPlease Note Page Programme Search Unblocking the parental lock for individual channels1 All Channel/Programme System Configuration Conditional AccessActivate factory settings/Delete programme memory Service Channel Activate Factory SettingDelete all programmes Technical Terms Glossary Modulation at 22 KHz Intermediate FrequencyLNB/LNC Low Noise Block converter ModeSatellite Receiver Technical DataUniversal LNB VCR Scart Number of Programmes Problem Possible Cause Solution Troubleshooting GuideUsing the programme/channel list Summary for everyday use Switching on and offVolume adjustment Using the up/down arrow keys