TechniSat TechniBox VIACAM Adjusting sound volume, Selecting a different language

Page 20

>Open the cover on the right side of the front panel of the receiver, by opening the cover downwards as indicated.

>Either insert the VIACCESS card into the slot of the integrated card reader,

Or

>Insert a CA module in one of the two slots provided.

>Insert a smart card in the card slot of the CA module.

Take care to ensure the gold-coloured chip on the smart card is on the upper side, in the direction in which the card is being inserted.

>If a scrambled programme is now selected, your receiver will automatically check on both the integrated card reader and on both CA slots for the presence of a valid smart card resp. of a CA module with a valid smart card. If it finds one of these, the scramb- led programme will be displayed in decoded form.

6.4 Adjusting sound volume

You can adjust the volume of your receiver. This facilitates use of the receiver, as it means you have all important functions in one remote control, and will have to revert to the remote control of your TV set only very rarely.

>Use the keys Volume + to increase the sound volume, and Volume - to reduce the volume.

>Press the key Sound on/Off to mute the sound. Repeated pressing of this key will restore the sound.

6.5 Selecting a different language

If a programme is broadcast in several languages, you can select a language as follows:

>Press the Language Selection key.

The list of languages available will now be displayed on screen.

>Use the up/down arrow keys to select the desired language.

>Confirm by pressing the OK key.

>Disable the menu display by pressing the Language Selection key again.

You can now listen to the programme in the selected language. If the programme is chan- ged, the receiver automatically reverts to the default language setting (see 5.3 Language

Selection). Your receiver also provides the facility to receive mono broadcasts. For mono transmissions, you can use the Language Selection A/B key to switch between the

MONO1 and MONO2 sound channels.

6.5.2 Dolby Digital (AC3 mode)

Some movies are broadcast in Dolby Digital format. This is indicated by the Dolby logo being displayed in the information window once the programme has been selected. If you have a separate Dolby Digital 5.1 Channel amplifier, you will be able, whenever it is broadcast, to enjoy such movies in 5.1 Channel Dolby surround sound.

In order to enjoy this facility, you must simply connect the digital output of your receiver (Audio Out Digital, see 4.7.2) with the digital input of your Dolby Digital 5.1 channel amplifier. If a programme is being broadcast in Dolby Digital sound, the Dolby logo will appear in the information window when the programme is selected.

Your receiver can be set to AC3 mode as follows:

>Press the Language Selection A/B key.

A list of available languages for this programme, as well as AC3, will be displayed.

>Select AC3 by means of the up/down arrow keys.

>Confirm by pressing OK.

You can now listen to the programme in 5.1 channel surround sound. If you change pro-

20

Image 20
Contents Viacam Remote control Arrow right Arrow downContents Page Viaccess Please read this first Important hints on UsageSafety Advice Equipment not in usePage External Installation ConnectionsMains connection Connection to a Television setSetting the UHF Output Channel Video Cassette Recorders VCR Super VHS Video Cassette RecordersAmplifier AnalogueInstallation Serial Interface RSUSB Interface OSD LanguageTime difference GMT hours Basic SettingsParental lock Audio/Video Settings CountryAdjustments for the External Unit Switching DiSEqC on or off Adjusting the Switching Matrix and LNB PropertiesAdditional Settings Switchover LOF low/highLOF low band LOF high bandProgramme Selection Operation Switching on and offIncreasing LNB voltage Using the Programme List Reception of scrambled encrypted ProgrammesSelecting blocked programmes Information Info BoxSelecting a different language Adjusting sound volumeDolby Digital AC3 mode TV/Radio selection Return to previous programme selectedDisplaying Time and Programme Information Additional Programme InformationSub-titles Electronic Programme GuideEPG functions allow you to Entering EPG dataNext Display of immediately following programmes Now Display of current programme contentsViewing the Electronic Programme Guide EPG Information PreviewEPG Functions Activate VCR Timer mode Disabling the timer functionPreselect Programme EPG SummaryEPG Search Displaying EPG Summary of other ChannelsPage Programming the Timer DateStart StopSwitching Timer on Repeat StatusSource ProgrammeChanging the Basic Programming Adding/Deleting ChannelsDeleting items from the Total List Adding items to the User Channel ListDeleting items from the User List Sorting Channels Blocking ChannelsPlease Note Changing the PINProgramming the Electronic Programme Guide Page Unblocking the parental lock for individual channels Programme Search1 All Channel/Programme Activate factory settings/Delete programme memory Conditional AccessSystem Configuration Delete all programmes Activate Factory SettingService Channel Technical Terms Glossary Intermediate Frequency LNB/LNC Low Noise Block converterMode Modulation at 22 KHzUniversal LNB Technical DataSatellite Receiver VCR Scart Number of Programmes Troubleshooting Guide Problem Possible Cause SolutionSummary for everyday use Switching on and off Volume adjustmentUsing the up/down arrow keys Using the programme/channel list