Hitachi X200 Series instruction manual Monitor Mode Programming Mode

3−4

Keypad Navigation Map

You can use the inverter’s front panel keypad to navigate to any parameter or function. The diagram below shows the basic navigation map to access these items.

Configuring Drive Parameters

Monitor Mode	Programming Mode
PRG LED=OFF		PRG LED=OFF
Display Data	Select parameter	Edit parameter
Power down

1	FUNC	1		Store as
		Select		powerup
				default
		Function or
		Group	2	Increment/
1	2	1
				decrement
				value
1	2	1	2
				1	2
1	2	1	2	Edit
		FUNC	FUNC		FUNC
1	2	1	2
					STR
1	2	1	2
1	2	1	2	Write
				data to
				EEPROM
1	2	1	2
			Return to
			parameter
	2		2	list

NOTE: The inverter 7-segment display shows lower case “b” and “d”, meaning the same as the upper case letters “B” and “D” used in this manual (for uniformity “A” to “F”).

NOTE: The Store Key saves the edited parameter (shown in the display) to the inverter’s EEPROM. Upload or download of parameters to/from external device is accomplished through a different command–do not confuse Store with Download or Upload.