Hitachi X200 Series instruction manual Exs, Exe, Ex%S, Ex%E, Lvl, Samp

3−14

Configuring Drive Parameters

		“A” Function	Run	Defaults
Func.	Name /	Description	Mode -FE -FU		Units
Code	SRW Display		Edit (EU)	(USA)
A005	[AT] selection	Five options; select codes:	02	02	−
		02…Select between [O] and
		integrated POT at [AT]
		03…Select between [OI] and
		integrated POT at [AT]
		04…Only [O] input active
		05…Only [OI] input active

	AT-Slct	O/VR
A011	O-L input active range start		The output frequency	0.0	0.0	Hz
	frequency		corresponding to the analog input
			range starting point,
	O-EXS	0000.0Hz	range is 0.0 to 400.0
A012	O-L input active range end		The output frequency	0.0	0.0	Hz
	frequency		corresponding to the analog input
			range ending point,
	O-EXE	0000.0Hz	range is 0.0 to 400.0
A013	O-L input active range start		The starting point (offset) for the	0.	0.	%
	voltage		active analog input range,
			range is 0. to 100.
	O-EX%S	00000%
A014	O-L input active range end		The ending point (offset) for the	100.	100.	%
	voltage		active analog input range,
			range is 0. to 100.
	O-EX%E	00000%
A015	O-L input start frequency		Two options; select codes:	01	01	−
	enable		00…Use offset (A011 value)
	O-LVL	0Hz	01…Use 0Hz
A016	External frequency filter time		Range n = 1 to 17, where n =	8.	8.	Sam-
	constant		number of samples for avg.			ples
	F-SAMP	00008