Hitachi X200 Series instruction manual See Output Logic and Timing on

B−38

C102	Reset selection		Determines response to Reset input	114Ah	0, 1, 2	−
			[RS].
			Three option codes:
			00…Cancel trip state at input
			signal ON transition, stops
			inverter if in Run Mode
			01…Cancel trip state at signal OFF
			transition, stops inverter if in
			Run Mode
			02…Cancel trip state at input ON
			transition, no effect if in Run Mode
C141	Input A select for logic	R/W		1150h	0, 1, 2, 3,	−
	output		See “Output Logic and Timing” on		4, 5, 6, 7,
C142	Input B select for logic	R/W	page 3–63	1151h	8, 10, 43
	output
C143	Logic function select	R/W	Applies a logic function to calculate	1152h	0, 1, 2	−
			[LOG] output state, Three options:
			00…[LOG] = A AND B
			01…[LOG] = A OR B
			02…[LOG] = A XOR B