Hitachi X200 Series instruction manual OI-L input active Ending point offset for

B−30

Appendix B

List of Holding Registers

Func.	Name	R/W	Description		Network Data
Code				Reg.		Range	Res.
A104	[OI]-[L] input active	R/W	The ending point (offset) for the	1084h		0 to 100	1 %
	range end voltage		current input range,
			range is 0. to 100.%
A105	[OI]-[L] input start	R/W	Two options; select codes:	1085h		0, 1	−
	frequency enable		00 …Use offset (A101 value)
			01 …Use 0Hz
A141	A input select for	R/W	Five options:	108Eh		0 to 4	−
	calculate function		00…Digital operator
			01…Keypad potentiometer
			02…[O] input
			03…[OI] input
			04…Network variable
A142	B input select for	R/W	Five options:	108Fh		0 to 4	−
	calculate function		00…Digital operator
			01…Keypad potentiometer
			02…[O] input
			03…[OI] input
			04…Network variable
A143	Calculation symbol	R/W	Calculates a value based on the	1090h		0, 1, 2	−
			A input source (A141 selects) and
			B input source (A142 selects).
			Three options:
			00…ADD (A input + B input)
			01…SUB (A input - B input)
			02…MUL (A input * B input)
A145	ADD frequency	R/W	An offset value that is applied to	1091h		0 to 4000	0.1 Hz
			the output frequency when the
			[ADD] terminal is ON.
			Range is 0.0 to 400.0 Hz
A146	ADD direction select	R/W	Two options:	1093h		0, 1	−
			00…Plus (adds A145 value to the
			output frequency setting)
			01…Minus (subtracts A145 value
			from the output frequency etting)
A151	POT active range start	R/W	The output frequency	1095h		0 to 4000	0.1 Hz
	frequency		corresponding to the POT range
			starting point,
			range is 0.0 to 400.0 Hz
A152	POT input active range	R/W	The output frequency	1097h		0 to 4000	0.1 Hz
	end frequency		corresponding to the POT range
			ending point,
			range is 0.0 to 400.0 Hz
A153	POT input active range	R/W	The starting point (offset) for the	1098h		0 to 100	1 %
	start		POT range, range is 0. to 100.%
A154	POT input active range	R/W	The ending point (offset) for the	1099h		0 to 100	1 %
	end		POT range, range is 0. to 100.%
A155	POT input start	R/W	Two options; select codes:	109Ah		0, 1	−
	frequency enable		00…Use offset (A151 value)
			01…Use 0Hz

Note 1: When the value is 10000 (100.0 seconds), a value in the second decimal place is ignored. (for A092/A292 and A093/A293).