Hitachi X200 Series 49, Group Intelligent Terminal Functions, Input Terminal Configuration

Configuring Drive Parameters

3−49

“C” Group: Intelligent Terminal Functions

The five input terminals [1], [2], [3], [4], and [5] can be configured for any of 31 different functions. The next two tables show how to configure the five terminals. The inputs are logical, in that they are either OFF or ON. We define these states as OFF=0, and ON=1.

The inverter comes with default options for the five terminals. These settings are initially unique, each one having its own setting. Note that European and US versions have different default settings. You can use any option on any terminal, and even use the same option twice to create a logical OR (though usually not required).

NOTE: Terminal [5] has the ability to be a logical input, and to be an analog input for a thermistor device when PTC function (option code 19) is assigned to that terminal.

Input Terminal Configuration

Functions and Options – The function codes in the following table let you assign one of twenty eight options to any of the five logic inputs for the X200 inverters. The functions C001 through C005 configure the terminals [1] through [5] respectively. The “value” of these particular parameters is not a scalar value, but it is a discrete number that selects one option from many available options.

For example, if you set function C001=00, you have assigned option 00 (Forward Run) to terminal [1]. The option codes and the specifics of how each one works are in Chapter 4.

		“C” Function		Run	Defaults
Func.	Name /		Description	Mode	-FE	-FU	Units
Code	SRW Display			Edit	(EU)	(USA)
C001	Terminal [1] function		Select input terminal [1] function, 30		00	00	−
			options(see next section)		[FW]	[FW]
	IN-TM 1	FW
C201	Terminal [1] function,		Select input terminal [1] function for
	2nd motor		2nd motor, 30 options(see next
	2IN-TM 1	FW	section)
C002	Terminal [2] function		Select input terminal [2] function, 30		01	01	−
	IN-TM 2	RV	options(see next section)		[RV]	[RV]
C202	Terminal [2] function,		Select input terminal [2] function for
	2nd motor		2nd motor, 30 options(see next
	2IN-TM 2	RV	section)
C003	Terminal [3] function		Select input terminal [3] function, 30		02	16	−
			options(see next section)		[CF1]	[AT]
	IN-TM 3	AT
C203	Terminal [3] function,		Select input terminal [3] function for		02	16
	2nd motor		2nd motor, 30 options(see next		[CF1]	[AT]
	2IN-TM 3	AT	section)
C004	Terminal [4] function		Select input terminal [4] function, 30		03	13	−
			options(see next section)		[CF2]	[USP]
	IN-TM 4	USP
C204	Terminal [4] function,		Select input terminal [4] function for
	2nd motor		2nd motor, 30 options(see next
	2IN-TM 2	USP	section)
C005	Terminal [5] function		Select input terminal [5] function, 30		18	18	−
			options(see next section)		[RS]	[RS]
	IN-TM 5	2CH
C205	Terminal [5] function,		Select input terminal [5] function for
	2nd motor		2nd motor, 30 options(see next
	IN-TM 5	2CH	section)