Hitachi X200 Series instruction manual Deceleration time Range is 0.01 to

B−33

List of Holding Registers

Func.

Code

Name

R/W

Description

Network Data

Reg. Range Res.

B052	OV-LAD Stop level of	R/W	Setting the OV-LAD stop level of	10CBh	0 to 10000	0.1 V
	non stop operation		non stop operation. Range is 0.0
	setting		to 1000.0
B053	Deceleration time of	R/W	Range is 0.01 to 3000	10CCh	1 to 300000	0.01 sec
(high)	non stop operation
B053	setting	R/W		10CDh
(low)
B054	Frequency width of	R/W	Setting of the first quick	10CEh	0 to 100	0.1 Hz
	quick deceleration		deceleration width. Range is 0.0
	setting		to 10.0
B055	DC bus AVR P-gain	R/W	Proportional gain adjustment for	1173h	2 to 50	0.1
			DC bus AVR function. Range is:
			0.2 to 5.0
B056	DC bus AVR I-time	R/W	Integration time adjustment for	1174h	0 to 1500	0.1s
			DC bus AVR function. Range is:
			0.0 to 150.0
B080	[AM]analog signal gain	R/W	Adjust of analog output at	10CFh	0 to 255	−
			terminal [AM],
			range is 0 to 255
B082	Start frequency	R/W	Sets the starting frequency for	10D1h	5 to 99	0.1 Hz
	adjustment		the inverter output, range is 0.5
			to 9.9 Hz
B083	Carrier frequency	R/W	Sets the PWM carrier (internal	10D2h	20 to 120	0.1 Hz
	setting		switching frequency), range is
			2.0 to 12.0 kHz
B084	Initialization mode	R/W	Select the type of initialization to	10D3h	0, 1, 2	−
	(parameters or trip		occur, three option codes:
	history)		00…Trip history clear
			01…Parameter initialization
			02… Trip history clear and
			parameter initialization
B085	Country for	R/W	Select default parameter values	10D4h	−	−
	initialization		for country on initialization,
			three option codes:
			00…Japan
			01…Europe
			02…US