> Press to make exact
Adjusting to different outdoor units
>Press
>Press or
>Press
to set pointer to „Gesp. Position“ (stored position). to store.
to set pointer to „Westgrenze“ (West limit).
Satellite scan |
|
satellite Hispasat 1 | 30W |
channel Tdeporte | 12.149 GHz |
stored position | 4816 |
antenna posit. | 4816 |
> West limit | 4806 |
East limit | 5058 |
antenna control | LNB 1 |
optimise skew | 132 |
^/v/</>/MENU/OK/STOP
> | Press | or | to |
| store (the West limit is | ||
| stored | 10 | pulses |
| further |
| West |
| automatically). |
|
Now you can find additional satellites using the automatic satellite scan feature (see 5.5).
> | Press |
| to set pointer to „antenna control“. |
> | Press | or | to select between: |
| „LNB 1“: |
| Antenna only moves when receiving channels via LNB input 1 (e.g.: positioning mechanism on LNB |
|
|
| input 1, fixed position antenna on LNB input 2). |
| „LNB 2“: |
| Antenna only moves when receiving channels via LNB input 2 (e.g.: positioning mechanism on LNB |
|
|
| input 2, fixed position antenna on LNB input 1). |
| „LNB 1 and 2“: Antenna moves when receiving channels via LNB inputs 1 or 2 (e.g.: positioning mechanism with 2 | ||
|
|
| LNBs, such as Ku and C band). |
| „off“: |
| Antenna does not move (e.g.: fixed position antenna). |
> | Press | to store and to return to the installation menu. |
If you start the „optimise skew“ feature, the optimal skew value is automatically selected.
> Press | to set pointer to „optimise skew“. | OK |
>Press to optimise.
Warning: The calculated value is not stored. It is only used to simplify the satellite scan. Your polarizer should be mounted such that the
12