Loewe A 26, A 26 DVB-T, A 26 DVB-T CI operating instructions AV2

Operating additional equipment

Connect Loewe DVD Preceiver Auro 8116 DT and Tremo loudspeaker system

You can play audio signals from the TV or DVD player in cinema quality with these components. The Tremo system includes 5 speakers for the front, center and surround reproduction in addition to the subwoofer illustrated below. The center signal can be reproduced alternatively by the TV speak- ers.

Connect the cubic socket on the DVD Preceiver to the “Master” cubic socket on the subwoofer. Use the cubic plug cable enclosed with the DVD Preceiver. Plug the white plug (without kink protection) into the cubic socket on the subwoofer For TV as a center loudspeaker connect “AUDIO IN C” on the TV set to “PRE OUT C”on the DVD Preceiver with a cinch cable.

Connect the digital audio output of the TV set “AUDIO DIGITAL OUT” to the “DIGITAL IN” input of the preceiver with a cinch cable. Connect the TV socket “SERVICE“ to the TV-L-Link socket on the Preceiver with the L-Link cable (provided with the Preceiver). Switch on the TV set and the Preceiver. Via the L-Link the TV recognizes whether the Preceiver is connected. Select the “Tremo“ loudspeaker system in the DVD menu of the Preceiver, set the listener/speaker distances and adjust the speaker levels. Please consult the DVD Preceiver manual.

If you want to listen to the sound over the TV speakers temporarily, call the Sound menu, select “Sound via“ and then “TV“. If you want to listen to the sound over the Loewe Auro system, select “Auro“ under “Sound“.

Power OUT	ON
R
Surr.	OFF
L
R

Front C				Bass Intensity
L
Center to				Min.	Max.
			Line IN		Phase
Sat	TV		Right Subw. Left	0	180
	Slave	Surr.
		Front
			Right Center Left

System connector

230V~50/60Hz Master

					AV2	AUDIO IN	AUDIO DIGITAL		SERVICE
						C	OUT		L-Link
	PREOUT		AUX1 IN AUX OUT		AUX 2		GND	FM (75 1)
FL	C	FR
			L	L
					DIGITAL
					IN
					DIGITAL
					OUT
SL	SUB	SR	R	R	TV	EXT
					12V/15mA	L-Link

24