Loewe A 26, A 26 DVB-T, A 26 DVB-T CI Component Video connection, Sound from PC or Set Top Box

Operating additional equipment

Sound from PC or Set Top Box

Feed the analog audio signal from the PC or the STB to the sockets AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced by the TV speak- ers.

If you have connected a digital external audio amplifier, you can select the digitla audio signal in the connection wizard (TV menu – Connections

–New devices/modifications) and assign it to the VGA/XGA socket. You do the other settings for the audio amplifier as described for the digital amplifier on page 25. The digital audio signal of the Set Top Box is fed in at the AUDIO DIGITAL IN socket on the TV. The digital audio signal from the TV AUDIO DIGITAL OUT is fed to the amplifier.

Component Video connection

If you have a DVD player/recorder with Component OUT connections, you can connect it to the SD/HD-COMPONENT IN sockets of the TV instead of to the Euro AV sockets. The connecting cable with three cinch plugs each transmits picture information. The playback is better quality than via the Euro AV socket.

You need another cinch cable for the analog sound transmission. Connect the analog audio outputs of the DVD player to the AUDIO IN L/R sockets on the TV set. The sound is reproduced by the TV speakers.

If you want to use the digital sound of the DVD player with a digital audio amplifier connected to the TV, make a connection between AUDIO DIG OUT of the DVD player and AUDIO DIGITAL IN of the TV set.

Log in the Component device in the connection wizard:

Assign the AUDIO DIG. IN input here, if a digital audio amplifier is also connected, to the COMP. IN socket. You do the other settings for the audio amplifier as described for the digital amplifier on page 25.

Set the signal at the Component input in the connection wizard.: Set to “Automatic“ first. If the signal is not reproduced when playback is started, consult the manual of the connected DVD device to find out what screen resolution is possible (SDTV, HDTV or ProScan).

Select the HDMI connection in the AV selection.

	AV	Call AV selection
		DMI/DVI	AV selection		VIDEO AV1 AV2 AVS VGA/XGA	HDM
			COMP. IN	OK
	OK	Select COMP. IN sockets and with ...
	OK	call up
Start playback on the connected device.
Set geometry
Call the TV menu with the MENU button, select “Geometry“ with						and
set:

If the picture is not positioned correctly you can move the picture horizon- tally and vertically here so that it fills the whole screen. You can also set the phase position so that the picture appears in the best possible quality.

27