What to do, if ...
Problem | Possible cause | Help | ||
|
|
| ||
Timer recording, Change timer and Delete timer | No video or DVD recorder connected/logged in | Log in the video or DVD recorder in the connection | ||
are not displayed in the TV menu |
|
| assistent and connect the device. | |
|
|
| ||
“Connections” for example cannot be called in | A time recording is in progress | Wait until the timer recording has ended or delete | ||
the TV menu (grayed out) |
|
| the timer. | |
|
|
|
|
|
The control of the Loewe video recorder and the | a) | The Digital Link function is not activated or not | a) | Activate Digital Link in the video recorder (see |
timer do not work or do not work properly. |
| possible in the video recorder |
| operating instructions of the video recorder) |
| b) | Euro AV cable not connected | b) | Connect the Euro AV cable |
| c) | Video recorder not logged in | c) | Log in the video recorder. |
|
|
|
|
|
General problems with connecting external | a) | The device is not logged in in the connection | a) | Compare the connection diagram with the |
equipment via an AV input |
| wizard or connected differently to shown in the |
| actual installation in the connection wizard and |
|
| connection diagram. |
| connect as shown if necessary. |
| b) | The AV standard is set incorrectly | b) | Set the standard correctly |
| c) | The AV signal is set incorrectly | c) | Set the AV signal correctly |
|
|
| If “Automatic” is set for AV standard or AV signal, | |
|
|
| this can lead to faults with signals which do not | |
|
|
| conform to standard. Then the standard and the | |
|
|
| signal are set according to the specifications in the | |
|
|
| operating instructions of the external device. | |
|
|
|
|
|
A decoder connection does not function or is | a) | The signal is not decoded because the wrong | a) | Follow the instructions in the connection wiz- |
faulty |
| decoder programs are selected in the connec- |
| ard again and select the appropriate decoder |
|
| tion wizard. |
| programs. |
| b) | The sound is missing in decoder mode because | b) | Follow the instructions in the connection |
|
| the wrong decoder sound is assigned in the |
| wizard again and select the right audio soukrce |
|
| connection wizard. |
| (decoder, TV or autom.), see instructions of the |
|
|
|
| decoder. |
|
|
| ||
All menus appear in the wrong language | Menu language has been set incorrectly | Set your menu language: | ||
|
|
| Press the INFO button in TV mode (index). Mark | |
|
|
| the first listing and call with OK. Then select the | |
|
|
| language and confirm with OK. | |
|
|
|
|
|
29