Loewe Spheros 42 HD, 42 HD/DR+ manual Remote control RC3, Switching on/off, TV equipment

Page 10

Daily handling

Remote control RC3

Remote control for operating different Loewe units.

TV

DVD STB

Use the drive buttons in TV- and STB position for VCR, DVD or Digital Recorder You can switch over the six drive buttons both for TV and STB for operating a VCR or DVD player/recorder. Operation of the built-in Digital

Switching on/off

Your TV set is equipped with an economy standby power supply unit. On standby the power consumption drops to low power. If you

VCR

Operating the TV:

Set the rotary switch to ÓTVÓ.

Recorder Plus is specified ex-factory.

want to save even more electricity, switch the set off at the On/Off switch (Signal Box).

TV

DVD STB

VCR

First turn the switch to the main function TV or STB.

But remember that EPG data will then be lost and timed recordings will not be made.

Ex-factory settings are: Loewe video recorder, Loewe DVD recorder and for STB (Set Top Box) the d-box common in Germany.

The remote control must be switched for operating a Loewe DVD player.

TV equipment

Functions marked by are not available in all types of TV sets but can usually be retrofitted. Ask your dealer if you are interested.

Menu contents may differ from the ones shown depending on your TV equipment.

Operation of the ÓDigital RecorderÓ, if available, are described in a separate operating

EPG

wxyz

tuv

tuv

TV

DVD STB

VCR

Press the END and * EPG but- tons at the same time (5 secs). The display at the top left of the remote control flashes twice.

Enter the numbers 988 one after the other. The display again flashes twice.

Now turn the switch to the required function for the drive buttons. DVD, VCR or TV if the Digital Recorder is to be used.

When the TV is switched on, you can switch it to standby with the blue on/off button. The red standby indicator on the set

lights up. If the green indicator is also alight a timer recording on the VCR is in progress, EPG data input is taking place or radio mode without on-screen display is active.

From standby it is best to switch back on with the blue On/Off button or with a numeric key (station 0-9). The green (blue) operating LED

manual.

 

You can show your TV

 

equipment by pressing the

 

INFO button on the remote

 

control.

OK

Select the ÓEquipmentÓ line in

the ÓMain informationÓ menu.

 

OK

Press the OK button.

 

Hide the menu again with the

 

END button.

10

PIP

Press the # PIP button to com- plete the setting. The display flashes twice.

The setting is saved.

then lights up.

When you switch on the TV

OK with OK, you see the station table and can choose a station.

None of the indicators lights up when you switch off the TV set with the On/Off button on the set.

Switch on the TV set with the On/Off button on the set when it is switched off.

31936_021_Spheros42HDR+_GB

10

18.10.2004, 10:17 Uhr

Image 10
Contents Operating Instructions Contents Digital Recorder record immediately Sound off/on mute Timer overviewRemote operation TV functions Call main information Menu Info texts on/offVGA Connections Signal BoxRC5/RC6 Display menu Operation on the signal boxVideo input Installation possibilities SetupFor your safety Please note Setup and cleaningTilting Spheros wall unit Showing dark strips to the right and left of the imageSwitching on Initial installationInitial installation BatteriesMenu functions in TV Daily handlingRotating the TV set Switching on/off Remote control RC3TV equipment With the station table Changing channelsDigit stations Call Audio/Video programs AV selectionGeneral menu operation Adjusting the soundAdjusting the picture Operation on the TV setTV mode Modes of operationPicture in Picture PIP EPG mode Radio mode Displaying teletext pages Teletext modeProgram timer recordings Selection with the numeric buttonsFor about 1 second Loewe DialogOnly activated in connection with the Digital Recorder Plus Call ArchiveOperation of additional equipment Video modeDigital Link must be switched on on the video recorder Video menuLogging in equipment Connecting VCR equipmentSignal box Video recorderIR-Link Video playbackCalling an AV in the station table Digital output Operating additional equipmentDVD player Digital input/outputSpheros with Concertos sound system Connecting Loewe sound systemsAV-connection/Select device Select the AV connection toEPG Press the END and * EPG Twice after the last numberBox TwiceSet the rotary switch to Using the RC3 remote control for operating a video recorderÓdvdó Signal Box Spheros Loewe sound systems Concertos and Spheros15 m Surround speaker Right Acoustimass¨ Module Loewe sound systems Certos/Concertos and Spheros15 m Surround speaker Left Function switch off position on/ off Setting the rotation area a maximum of +/- 40 degreesDetermining the switch off position Viewing angle range of rotationDisplaying PC images DVI/VGA VGA geometry settingsPC image settings DDC Function Display Data ChannelProblem Possible cause Remedy What to do whenVCR Connections signal box front Technical dataConnections signal box rear Accessories Available accessoriesUpgrade kits RacksGUS Codelist LoeweXMS NADSEG SVAAVP ASAESC ITTNU-TEC RFTNEC SBRADB DMTDNT AGSJOK HNEIrte SATCable Box STB 31936021Spheros42HDR+GB 18.10.2004, 1018 Uhr

Spheros 42 HD, 42 HD, 42 HD/DR+ specifications

Loewe, a renowned name in high-end audio-visual technology, has consistently released products that merge innovative design with cutting-edge technology. Among their most impressive offerings are the Loewe 42 HD/DR+, 42 HD, and Spheros 42 HD televisions, all of which cater to discerning consumers seeking an elevated viewing experience.

The Loewe 42 HD/DR+ serves as an epitome of quality and sophistication, featuring a high-definition display that delivers bright and vivid colors, coupled with exceptional contrast ratios. This model incorporates the innovative Loewe DR+ technology, which integrates a built-in hard drive for recording digital content seamlessly. Users can schedule recordings with ease, pause live TV, and enjoy their favorite shows at their convenience. It is designed with a sleek and minimalist aesthetic, fitting effortlessly into contemporary living spaces.

The Loewe 42 HD, while slightly less advanced than its DR+ counterpart, still showcases the brand's commitment to premium picture quality and sound. It supports Full HD resolution and comes equipped with Loewe's sophisticated processing technology, ensuring that images are sharp and free from artifacts. This model is ideal for those who desire high-quality performance without the recording features, offering a pure viewing experience.

Spheros 42 HD takes a different approach with its unique spherical design, adding an artistic flair to the traditional flat-screen television. This model is not just about looks; it delivers crisp HD images and comes with state-of-the-art sound technologies that enhance audio playback. Spheros 42 HD is equipped with adaptive sound settings that automatically adjust based on the viewing environment, ensuring that users enjoy optimal audio clarity regardless of room size or layout.

All these Loewe models boast cutting-edge connectivity options, including HDMI and USB ports, making it effortless to connect to external devices such as gaming consoles, Blu-ray players, and streaming devices. This flexibility is complemented by Loewe's intuitive user interface, designed to simplify navigation through various functionalities and settings.

In essence, the Loewe 42 HD/DR+, 42 HD, and Spheros 42 HD represent a fusion of design and technology, each catering to different preferences while maintaining the brand's ethos of quality and innovation. Whether one seeks advanced recording capabilities, outstanding picture and sound quality, or a unique design statement, Loewe's offerings ensure that every viewing experience is nothing short of exceptional.