Operating additional equipment
Converting the remote control in order to operate a Loewe DVD player or devices from other manufacturers
You can switch over the remote control for VCRs, DVD players and Set Top Boxes if the infrared code of the equipment type is listed in the code list or is in the code memory of the RC3. Switching over is done on the one hand by entering a
If you cannot find the equipment in the code list, try a suggestion from the remote control.
Even if the manufacturer of the equipment is included in the code list, it is possible that it cannot be operated. Not all functions on the RC3 are available for this equipment.
Switching over the remote control – with code input – e.g. to the Loewe DVD player Look for the code number of your equipment in the code list. The list is sorted according to equipment type Ð DVD, VCR, STB Ð and alpha- betically according to manufacturer. You will find one or more code numbers next to the manufac- turer name.
Twice after the last number.
If the number was incorrect, the display flashes for longer. The code number has not been accepted.
Once the code has been accepted with two flashes, you can test the functionality of the device you have just programmed.
If the device cannot be operated or is difficult to operate, repeat the code input with the next code from the list. If no other codes are specified for this manufacturer, try a code suggested by the remote control.
Switching over the remote control – with the suggestions by the remote control (see page
Switch on the device to which you want to set the remote control. Standby is not sufficient!
TV | Using the switch select whether |
DVD | STB |
VCR | you want to switch over to a |
| VCR, DVD player or a Set Top |
| Box. |
| EPG Press the END and * EPG |
| buttons at the same time (5 |
| secs). The display at the top left |
| of the remote control flashes |
| twice. |
PIP
EPG
Wait a moment for the reaction of the device. If the device does not react, the code is incorrect.
Press the # PIP button to call the next code.
Press the (Play) or O (On/ Off) button again.
If the device reacts, press the
*EPG button to confirm the code.
TV
DVD STB
VCR
EPG
AV
jkl
def
wxyz
Using the switch select whether you want to switch over to a VCR, DVD player or a Set Top Box.
Press the END and * EPG buttons at the same time (5 secs). The display at the top left of the remote control flashes twice.
Enter the four numbers from the code list one after the other (0539 for Loewe DVD player). The display flashes once after each number is entered.
wxyz Enter the numbers 991 one
wxyz after the other. The display flashes once after each number is entered.
EPG
Press the # PIP button to select the first code.
Hold the remote control pointed towards the device you want to switch over to. Watch the device.
Now press the (Play) or O (On/Off) button on the remote control.
24
31936_021_Spheros42HDR+_GB | 24 | 18.10.2004, 10:18 Uhr |