Loewe 42 HD/DR+ manual Connecting Loewe sound systems, AV-connection/Select device, First use

Page 23

Operating additional equipment

7.Select the ÒAssigning Audio digitalÒ line and press OK to confirm.

Assign audio digital

Digital In1 no to AV1 to AV2 to AVS

Digital In2 no

8.Select "Digital IN 1 - to AV3" for example for socket AV3 if a DVD player or CD player with coaxial-digital output is connected to digital input 1 and this device is logged in in the "Connections" menu.

If the video signal from a play console is connected to the AVS socket, the relevant device is logged in and the digital sound is present at the digital input 2, then select ÒDigital In 2 Ð to AVSÓ etc.

9.You can complete the settings by pressing the END key, the settings are then saved.

AV-connection/Select device:

Connecting Loewe sound systems

The arrangement of the speakers and the television set might look as depicted below. However, the layout of the front and surround speakers should be set up in symmetry to the television set and your sitting position.

The surround speakers can also be set up behind your sitting position, facing towards the front speakers.

The Acoustimass¨ module can also be set up in another place, e.g. particularly effective behind your sitting position, but in such a way that the bass frequencies are able to radiate freely.

Spheros with Concertos sound system

The Concertos sound system offers you a new type of sound dimension in music and film performances with integrated electronics.

Even at low volumes, you can then hear the full bass in the correct ratio to the higher and medium frequencies.

Loewe offers two sound systems Concertos 1 and Concertos 2, consisting of an Acoustimass¨ Module, a set of cables and the satellite speakers.

If the integrated speakers of the TV set are not to be used for the center channel, then Concertos 1 with five Loewe satellite speakers can be connected.

Your Spheros uses the integrated loudspeakers in the TV as a center channel. Therefore use Concertos 2 with four satellite loudspeakers.

Connecting Concertos components:

AV

Press the key 0 on the remote control a little longer; the AV selection bar is displayed again.

Before connecting the devices, ensure that they are switched off or pull out the mains plug.

AV Selection VIDEO AV1 AV2 AV3 AVS VGA/XGA DVI COMP.IN

Select the AV connection to

OK

which the sound source, such as

 

 

the DVD player, is connected.

Note

The digital TV sound or the digital sound from a DVD/CD player is only audible through the Digital Receiver or through the Concertos or Certos system.

Connect the components of the Concertos system to the TV set, as shown on page 26.

First use:

To put Spheros into use with the Concertos system, some settings from the Sound menu of Spheros are required.

In this context, please read the separate Operating Instructions ÓConcertos 1 / 2 Ð SoundÓ.

23

31936_021_Spheros42HDR+_GB

23

18.10.2004, 10:18 Uhr

Image 23
Contents Operating Instructions Contents Call main information Menu Info texts on/off Sound off/on mute Timer overviewRemote operation TV functions Digital Recorder record immediatelyRC5/RC6 Connections Signal BoxVGA Video input Operation on the signal boxDisplay menu For your safety SetupInstallation possibilities Showing dark strips to the right and left of the image Setup and cleaningTilting Spheros wall unit Please noteBatteries Initial installationInitial installation Switching onRotating the TV set Daily handlingMenu functions in TV TV equipment Remote control RC3Switching on/off Call Audio/Video programs AV selection Changing channelsDigit stations With the station tableOperation on the TV set Adjusting the soundAdjusting the picture General menu operationModes of operation TV modePicture in Picture PIP EPG mode Radio mode Selection with the numeric buttons Teletext modeProgram timer recordings Displaying teletext pagesCall Archive Loewe DialogOnly activated in connection with the Digital Recorder Plus For about 1 secondVideo menu Video modeDigital Link must be switched on on the video recorder Operation of additional equipmentVideo recorder Connecting VCR equipmentSignal box Logging in equipmentCalling an AV in the station table Video playbackIR-Link Digital input/output Operating additional equipmentDVD player Digital outputSelect the AV connection to Connecting Loewe sound systemsAV-connection/Select device Spheros with Concertos sound systemTwice Twice after the last numberBox EPG Press the END and * EPGÓdvdó Using the RC3 remote control for operating a video recorderSet the rotary switch to Loewe sound systems Concertos and Spheros Signal Box Spheros15 m Surround speaker Left Loewe sound systems Certos/Concertos and Spheros15 m Surround speaker Right Acoustimass¨ Module Viewing angle range of rotation Setting the rotation area a maximum of +/- 40 degreesDetermining the switch off position Function switch off position on/ offDDC Function Display Data Channel VGA geometry settingsPC image settings Displaying PC images DVI/VGAWhat to do when Problem Possible cause RemedyVCR Connections signal box rear Technical dataConnections signal box front Racks Available accessoriesUpgrade kits AccessoriesGUS Loewe CodelistSVA NADSEG XMSITT ASAESC AVPSBR RFTNEC NU-TECAGS DMTDNT ADBSAT HNEIrte JOKCable Box STB 31936021Spheros42HDR+GB 18.10.2004, 1018 Uhr

Spheros 42 HD, 42 HD, 42 HD/DR+ specifications

Loewe, a renowned name in high-end audio-visual technology, has consistently released products that merge innovative design with cutting-edge technology. Among their most impressive offerings are the Loewe 42 HD/DR+, 42 HD, and Spheros 42 HD televisions, all of which cater to discerning consumers seeking an elevated viewing experience.

The Loewe 42 HD/DR+ serves as an epitome of quality and sophistication, featuring a high-definition display that delivers bright and vivid colors, coupled with exceptional contrast ratios. This model incorporates the innovative Loewe DR+ technology, which integrates a built-in hard drive for recording digital content seamlessly. Users can schedule recordings with ease, pause live TV, and enjoy their favorite shows at their convenience. It is designed with a sleek and minimalist aesthetic, fitting effortlessly into contemporary living spaces.

The Loewe 42 HD, while slightly less advanced than its DR+ counterpart, still showcases the brand's commitment to premium picture quality and sound. It supports Full HD resolution and comes equipped with Loewe's sophisticated processing technology, ensuring that images are sharp and free from artifacts. This model is ideal for those who desire high-quality performance without the recording features, offering a pure viewing experience.

Spheros 42 HD takes a different approach with its unique spherical design, adding an artistic flair to the traditional flat-screen television. This model is not just about looks; it delivers crisp HD images and comes with state-of-the-art sound technologies that enhance audio playback. Spheros 42 HD is equipped with adaptive sound settings that automatically adjust based on the viewing environment, ensuring that users enjoy optimal audio clarity regardless of room size or layout.

All these Loewe models boast cutting-edge connectivity options, including HDMI and USB ports, making it effortless to connect to external devices such as gaming consoles, Blu-ray players, and streaming devices. This flexibility is complemented by Loewe's intuitive user interface, designed to simplify navigation through various functionalities and settings.

In essence, the Loewe 42 HD/DR+, 42 HD, and Spheros 42 HD represent a fusion of design and technology, each catering to different preferences while maintaining the brand's ethos of quality and innovation. Whether one seeks advanced recording capabilities, outstanding picture and sound quality, or a unique design statement, Loewe's offerings ensure that every viewing experience is nothing short of exceptional.