TV menu, Timer functions | Loewe L 20 DVB-T, A 20 DVB-T instruction

Modes of operation

TV menu

MENU	Call up TV menu.

		INFO END
	TV menu	INFO END
	TV menu	Sound Connections Settings
	Picture	Sound Connections Settings

You will ﬁnd a description of the picture and sound settings on page 14. The TV menu offers other settings for the TV set and for connected devices.

Select devices to be connected under “Connections”:

For example video recorder, DVD player/recorder, camcorder/digital camera or Pay-TV decoder.

1.Select the connection (AV1, AV2 (1 or AVS) to which you want to connect the device.

2.Conﬁrm with OK.

3.Select the device type , e.g. DVD and the signal type CVBS in the list which appears.

4.Conﬁrm with OK.

5.Specify which colour standard (e.g. PAL) the connected device transmits the signal with. Note: The signal cannot always be displayed correctly when the “Colour standard Automatic” is selected.

6.Conﬁrm with OK.

Other settings under ”Connections”

7.”RGB insertion yes” (via AV1) to play RGB signals e.g. from a games console on all channel positions.

8.”Switching voltage yes” so that the picture is immediately visible on the screen when playing back from a video device connected to the EURO-AV socket.

(1 AV2 is not available in DVB-T models.

Under “Settings“ you will ﬁnd the following functions:

Channels

• Automatic search • Manual settings • Change

Parental lock

If you do not want your children to be able to use the TV unsupervised, activate the parental lock by entering a four-digit access code. You can change or delete this access code in the ”Parental lock” menu (see also page 28).

Switch the set to stand-by after entering the access code or switch it off with the On/Off button (mains voltage). When switching on the set only shows a picture when you enter your access code.

Timer functions

You can have your TV switch off at pre-programmed times or wake you/remind you with radio or TV. If you are not present at the time, a safety prompt makes sure the TV switches off again after 5 minutes.

•TV off once only • One-time reminder • Wake up (Mo - Su)

•Wake up with TV or Radio • Wake up volume

Time and date

When you receive teletext, the correct date and time setting is picked up by the set automatically. The time is for information for timing services, e.g. alarm. If you do not receive teletext you have to set the date and time manually.

Use the numeric buttons on the remote control and the arrows to move from one digit position to the next.

In the time and date menu you can also set when you want the TV set to auto- matically start and end daylight saving. You can also set a deviation UTC.

Language

You can set the language in which the menus are displayed under Settings - Language.

If “your“ menu language is not set, you may have to select the “Language“ menu in a language you cannot understand:

1.Press the INFO key while no menu is displayed. The index appears.

2.Select the ﬁrst entry on the ﬁrst page (1/2), if it is not selected automatically.

3.Conﬁrm with OK.

You are now in the language menu and can select your language and enter it with ”OK”.

- 16